10 Pack Strip Discs Stripping Wheel 4 inch for Angle Grinder Clean and Remove Paint Coating Rust Welds Oxidation (4 x 5/8)

Great for removing surface rust or paint on metal. My husband is remodeling his old Chevy truck and this has worked great for stripping off the old paint and rust. Great product!

These work so good, I ordered twice to strip paint from doors. A few cautions: 1. make sure to wear safety glasses since material will fly off when using these stripping wheels and 2. stripped material will go all over the place due to the rate/speed from the grinder these wheels are used with. The material on the wheel will disintegrate quickly, but itll depend on what is being stripped. Overall, they work great!

Stripping wheels worked great for cleaning the surface rust on my drill press without grinding off metal. Going to try these on the pontoon algae buildup, update review after that.

They do the job, but the outside front edge wears so fast you cant get to use the full surface. Fine for the price.

Disks strips latex paint on wood just fine, except they wear out extremely fast. Like 30% less the usable life as the versions you get at home depot (Avanti Pro).

Stripped all insulated sound deadener from above the old headliner on a 1969 firebird roof. Works very good . Installed on a makita grinder and knocked it down to bare metal quickly. All safety equipment was used as needed etc.

worked as it should

These strip disc work great, i recommend it.

I’ve used similar from Walmart and they really lasted. They remove rust and paint really good. So I went out and tried them in my Makita 4” angle grinder and they fit like there supposed to. I have no doubt they will work well. My only complaint is that there’s two different types ( blue and purple) and no where on them do they say what they are. One I think feels coarser that the other, but I’m not positive. Either way they will get used . Too bad it’s getting real cold here now that winter is setting in or I would be trying them out.

Great paint stripper. It really eats paint without tearing up the metal underneath, all without loading up. Ive put about 4 hours of use on it, and it has retained nearly all of its original dimensions, unlike other products which seem to give up as much as they take off. Will definitely buy another if I ever succeed in destroying this one.