100% Silicone Roof Sealant - Self Leveling - Complete Waterproofing - Easy One Coat Application - Designed for Your RV, Camper, Trailer, Commercial Building. (1 Gallon, White)
-
JD
> 3 dayused for steel roof repair
-
Scott E Behmer
09-06-2025I did not take long to put on
-
Watts
12-06-2025Used for repair on a small section of flat roof. Good prep is essential. Used pressure wash and Simple Green to thoroughly clean area, let dry, then some Xylene, let dry, then some 91% alcohol for a final touch up. 4-5 days total prep. Roller application was simple, but youll need more than you think as the roller seems to really suck it up. 2 days to dry to a point where it was not tacky, but the night temps got into the low 40s, so understandable. Really good adhesion, but slippery when wet, so throw a little sand down during application if you ever want to walk on it.
-
ranbax
> 3 dayThe material works exactly as advertised. Great adhesion, levels out as stated. Highly recommend.
-
Kim B
> 3 dayVery easy to apply. Looks great once it dries. It doesnt take long to set. Water just beads off it. Very happy with this product.
-
Camper
> 3 dayWorked as expected
-
john gebo
> 3 dayThis product is awesome! the best r v roof paint that I have used..
-
E. P. Delaney
> 3 dayWorked exactly as hope it would coating a metal roof over bay window.
-
Todd L.
> 3 dayI liked how easy it was to apply and one coating was all I needed.
-
Robert Mayhew
> 3 dayIts a little pricey. Seems to be a strong durable coating. easy to apply by brush or roller. My airless sprayer was not up to the job. This product is very thick. I have no idea what solvent would thin a silicon coating and not have adverse effects. I was walking on it after a few days...seems to stick to any surface....,except plastic container it comes in. I am very happy and would buy it again.
Marlin Coatings - 100% Silicone Roof Sealant
"The Last Coating You"ll Ever Need"
- Easy Single Coat Application
- Complete Waterproofing
- Highly Reflective & UV Resistant
- Reduces Energy Cost and Lowers Internal Temps
- Self-Leveling, Flexible Material
- Protect & Extend the Life of Your Roof
- The Best Long-Term Solution You Can Make!
Standard Colors: White, Tan, Gray, Black
Compatible Roof Types:
- EPDM Rubber Roof
- Fiberglass
- TPO/PVC
- Metal
- Mod-Bitumen
- Spray Foam
- Granulated Cap Sheet
- Other Coatings and More!
Before & After : RV Roof Coating
|
|
|
|
|---|---|---|
Step One: PreparationFirst, it is imperative your roof is cleaned well to yield the best adhesion of the roof sealant. Remove all loose debris and clean the roof surface with a power washer or cleaner and a soft/medium bristle brush. Once cleaned, thoroughly rinse the roof and allow time for the roof to completely dry. For Aged EPDM Roofs: We offer an EPDM Rinse Cleaner is specifically formulated to clean and prime aged EPDM Rubber Roofs. |
Step Two: ApplicationFrom there, you can begin applying the product to your roof. This product can be brush, roll, or spray applied. Application can typically be done in one heavy coat. We recommend a coverage rate of around 60sqft per gallon. This coverage rate will yield a final cured thickness around 25 mils. For our complete bulletproof system, you can reseal all roof penetrations and seams with our Silicone Flashing Grade product. |
Final Step: CompletionOnce you have completed your roof project using our 100% Silicone products, it"s time to sit back and relax. Our products are proven to last and are able to withstand all the harsh outside elements. You now will have a seamless, completely waterproof membrane that will last for many, many years moving forward. |
Why You Should Consider Roof Coatings?
- Minimally Invasive: Coatings can be applied almost anywhere with little to no disruptions.
- Cost: Save thousands, and often offer the same protection as a new roof.
- Renewable: 25-50 years down the road, simply apply a new layer of coating.
- Highly Reflective: Stay cooler inside and save on energy cost.