10.1 inch LCD Display Touch Screen Glass Digitizer Replacement Part for Samsung Galaxy Tab A 2019 SM-T510 T515 M-T510NZ SM-T515 Combo

My son sent his SM-T510 flying and shattered the screen. After carefully removing the busted screen, all the glass shards and found no other damage, I ordered this one. The listing for this screen appears the most legit. Arrived packaged very well in only a couple of days. Included adhesive strips, which wasnt mentioned on the listing. I didnt use them because I had some 3M strips already (I repair iPads/iPhones and other androids, etc.) and had applied them before the new screen even arrived. There is one IC board that you will need to remove from the original and install here. Do NOT throw away your old screen until youre sure youve transferred everything. Once I got it all plugged in (without exposing the adhesive yet; always test before you stick it down!), I hardware-reset the device. It came up instantly. I then peeled off the adhesive backing and gently pressed the edge down. Put the tablet faced down on a table and several really heavy books on top of it for a few hours. Fired it up and worked great. But after using it for a bit, I do notice that the screen is noticeably dimmer than the original. Played with the brightness and power saving settings. Still had to leave it at almost full brightness. I use to be able to use it at mid-brightness. Oh well, my sons got his tablet back so Im not going to bother messing with it further.

Work like original. Good customer service and warranty.

Works great with SM-T510. Make sure to watch the YouTube video of how to do it, and which parts you need to transfer over to the new LCD. I was able to preserve the original screen glue/type, but if you destroy it you may have to purchase that on the side (frame to LCD/digitizer). Tip: using hair dryer to soften up the glue for easy removal.

a little expensive, but when I changed the part it was perfect.

Works like it should. Follow the YouTube videos

Love it