2023 New Upgrade WiFi Extender Booster Repeater, Up to 8000sq.ft and 45+ Devices, 2.4&5GHz Dual Band Wireless Internet Repeater and Signal Amplifier for Home & Outdoor, Supports Ethernet Port
-
Bentin
> 3 dayDas Kabel würde ich immer wieder kaufen. Für das Geld alles was man braucht.Erfüllen voll den Zweck. Warum teuer wenn auch günstig.
-
MARGARET
Greater than one weekGreat product, Easy to install, gave us a good signal through out our house even the basement where the signal was rely weak until we hook up the N-300.
-
MARGARET
> 3 daySolved out two story problem of wifi dead spots and extremely easy to set up for a non techy person. Would recommend to anyone needing to fix a dead spot.
-
KEITH
13-06-2025In my case, this extender has improved the strength of my WiFi and speed of devices.Outside of the hassle I had (again, maybe its just me) during setup, I recommend this product. I dont know how it works, but it really DOES work.
-
JOYCE
> 3 dayEasy to install, works just as described. Dramatically increased the range of my WiFi network, and is easy to use and reposition.
-
JOYCE
> 3 dayThe range is awesome it can connect through thick walls in my case have 2 solid concrete walls and no problems connecting at 100+ Mbps. Im really way satisfied with this product.
-
qttggw
> 3 dayThis seems to extend our wi-fi signal a bit better than what we were experiencing. We have a two story home with the base wi-fi in the back of the house. This seems to help quite a bit.
-
PATRICIA
> 3 dayExtended range to upstairs corner office and the speed is nearly as fast as being near the gateway modem/router.Simple to operate.
-
ALBERT
> 3 dayBought about 2 years ago and still good. Using Fast Lane 5ghz to ASUS RT-AC68U router and its very efficient and stable. No issues at all.
-
Musa
Greater than one weekBrauchte ein langes LAN Patchkabel um meinen PC mit dem Router zu verbinden. BIGtec 10m CAT.5e Ethernet LAN Patchkabel Gigabit Netzwerkkabel Patch Kabel... bei Amozon gesucht und gefunden! Kann ich nur empfehlen, klappt aufanhieb ;-)
|
|
|
|
|---|---|---|
4*3 dBi External Antennas180° and 90° rotating antennas can eliminate dead area and improve your existing WiFi coverage. For better performance and stable WiFi network with speeds of up to 867Mbps, 2.4GHz has farther penetration while 5GHz has faster speed. |
Smart Signal IndicatorsSignal LED indicates wireless signal strength between WiFi extender and your existing router. After initial setup, you can move your WiFi extender to any electrical outlets by reading the color of signal LED. |
With Vent Hole & WAN / LAN PortAir vents on both sides enhance heat dissipation capacity of the WiFi extender and ensure a safe working environment. Its WAN / LAN Port allows the WiFi extender to act as a wireless adapter to turn a wired device into a wireless one. |
|
|
|
|
|---|---|---|
Repeater Mode - Wireless to WirelessAmplify the WiFi signal of the wireless router, extend the coverage of the WiFi signal, and effectively solve the problem of weak WiFi signal and WiFi dead zone. (Suitable for home, office use) |
Repeater Mode - Wireless to WiredConvert wifi signals into wired signals through network cables to meet the network requirements of wired electronic devices, such as TVs, desktop computers, etc., reduce the distance of network cables, and avoid cluttered network wiring. |
Access Point Mode- Wired to WirelessUse Ethernet cable to connect this WiFi booster range extender to any Internet enabled Ethernet port in your room or Ethernet port of existing router, you can create a new dual band wireless network. Excellent for using at home or when travelling in hotel rooms. |
Reminder:
- The working status of the repeater can refer to its smart indicator light.
- WiFi signal booster is only limited to increase the coverage of the wireless signal, but not to increase the speed of the network.
- When the repeater expands the signal, it does not need to plug in the network cable. It can receive the signal of the router directly by plugging it into the socket, and transmit the wireless signal.
- When the repeater is unplugged or powered off after the setting is completed, it does not need to be reset. The original configuration information has been saved, unless you manually restore the factory state.
