3D Printer UV Resin Curing Light with Solar Turntable 360°Rotating Stand for SLA DLP LCD 3D Printer Solidify Photosensitive Resin 405nm UV Resin Affect, DIY Curing Enclosure

Used this light and turntable to construct a resin print curing station. I used a Home Depot bucket and metal reflecting duct tape. I cut a hole in the bucket lid and mounted the light to the lid using 4, 4mm x 20 screws and washers. The great thing about this light is I can leave it plugged in and use the inline switch. Curing only takes about 10 minutes. The turntable keeps the item moving and the reflective tape gives full coverage.

Love this going get one more

UV light is great, after speaking with the company about the turntable being broken, they sent me a new rotating stand which works perfectly. Would buy again.

Absolutely love it for the price! Not too heavy, and worked like a charm for my UV resin

I like it

Funciona perfectamente, cura los modelos bastante rápido y le hice una caja de curado con una caja de cartón, sencillo y efectivo. Muy satisfecha la verdad

Works well no complaints. Havent had any issues with the turntable as other have.

Was exactly what I needed

Built the enclosure. Tried several different resins (not cheap). Tried different angles, distances, turntables. Then today, I just put the resin coated item out in the sun and BOOM in 10 mins it was fully cured. This light, does NOT cure resin. Going to return. If you have one of these lights and your resin is still tacky after say...an hour or 6 hours in my case, try putting it out in the sunlight on the turntable for 10-15 mins. You will see. This light is crap.

Great bang for your buck! And you can use a amazon box to make a curing booth. Go green!