3D Printer UV Resin Curing Light with Solar Turntable 360°Rotating Stand for SLA DLP LCD 3D Printer Solidify Photosensitive Resin 405nm UV Resin Affect, DIY Curing Enclosure

It definitely does the job but the little spinning displaying thing doesnt feel super sturdy and works really hard at anything more than a few oz, kind of groans at me. Definitely a good little budget light set. The light itself seems to work great and very quickly! Would recommend to a friend!

Its cheap and it works well. The box it came it was the perfect size to cure things using the turn table. Just cut a hole for the light and lined it with aluminum tape. I used a smart plug for a timer.

Im yet another reviewer stating the same as others saying the turntable is just awful. Three months of just sitting there is enough to kill the turntable. I took it apart like another reviewer and found the same flimsy gears & wires setup. The trouble will be finding a better one. All the other competing products seem to be this same exact unit. The light is great though!

A very affordable and efficient way to cure your prints. Grab an old cardboard box and line it with tin foil or white paper, slap these bits in there and youve got a great homemade cure station.

Built the enclosure. Tried several different resins (not cheap). Tried different angles, distances, turntables. Then today, I just put the resin coated item out in the sun and BOOM in 10 mins it was fully cured. This light, does NOT cure resin. Going to return. If you have one of these lights and your resin is still tacky after say...an hour or 6 hours in my case, try putting it out in the sunlight on the turntable for 10-15 mins. You will see. This light is crap.

Excellent quality

Pros: turn table works great Cons: not sure if the light is the right wavelength to cure the resin I am using, Elegoo water washable.

Have only used it 3-4 times but so far it works well and does as it should. Projects have been smaller ones but cured well.

As the description states, the Turntable diameter is 3-1/2 (89mm) and it is totally solar powered - no battery required. The reason for the 3-stars is because the Turntable arrived nonfunctional. My husband disassembled it and found a wire hanging free and a cold solder joint where the wire was supposed to be attached. A quick repair with his soldering iron and the motor began to spin. (The four solar cells produce about 1.2 volts combined.) This is no On/Off switch. When light is present the motor is spinning. The UV Light works well - no issues. Someone with some electrical knowledge might add an On/Off switch to the Turntable and there is access for a battery - although youll have to fashion a battery holder - like a AAA or AA size.

I like that the turntable is powered by the UV light.