3D Printing GT2 Timing Belt, Zeelo 10 Meters (32.8ft) GT2 Open Timing Belt 2mm Pitch 6mm Width Rubber Fiberglass Fit for RepRap Prusa Mendel Rostock CR-10 Ender 3 3D Printers - Black

The belt is within spec of the original belt I replaced. Original was metal wire reinforced, this belt is Fiberglas reinforced and just a hair thicker which makes it stronger. The bulk belting material is just that, no metal sleeves for installation you will need to reuse your old ones and clamp them on to the belt ends or buy new ones listed on the same page as the belting. This is not a “kit”, you cut the belt to length and add the metal clips to attach the belt! I used this belting on a Creality CR-10 3D printer and it fit just like the factory belt which broke after 5 years of constant use. I expect this material to last about the same. Amazon also sells a “kit” for the Creality Cr-10 which includes two belts X and Z axis, pre cut and clamped with the metal clips for those who do not wish to make up their own set from scratch. I will repurchase this belting if it wears out down the road. Order was easy, mail was fast, printer is back in action. I am a “happy customer”

Kit was perfect for a 6050 build im doing. I had no issues with the parts and they were packaged well! Rollers are nice and sturdy. I recommend this for a DIY build aluminum extrusion frame.

Just the fix we were looking for. Not a bad price quick shipping.

Do not order. They shipped 5 m only not 10.

I have a BobsCNC E4 and the belt broke. Found this one and it fit perfectly. Much better deal than going through BobsCNC for a replacement part

I have several 3D printers of different brands and models printing 24/7. I 3D print free ICUshieldMN face shields. These belts are great. They fit all the different printers I have and hold up great as any belt I have used. In my picture you can see what a normal belt (left) and a stretched out used belt (right) looks like after 5 months of 24/7 use.

Decent price. Functions as expected

Belt failed inside a 50c chamber for only 300+ hours, a good quality belt should last 10x longer

The belt seems to be really low quality. About an inch portion of the belt stretched after using it on my ender3 for about a month.

Good, fit my project nicely.