













4 Inch Caster Wheels, Heavy Duty 4” Casters Set of 4 with Brake, TONSUM No Noise Polyurethane (PU) Wheels and Safety Dual Locking casters, Swivel Plate Castors(Two Hardware Kits for Free)
-
Alberto Garcia
Greater than one weekNo issues using this product. On a side note these wheels are large enough that I was able to push a heavy object through the grass with it. Where I live the grass is very coarse so wheels need a relatively large diameter to roll well.
-
Brian and Marie
> 3 dayIm using on an outside gate(not intended purpose) and so far theyre doing what I need them to do, roll the gate open and roll the gate shut.
-
kirsten knutson
> 3 dayVery happy with the casters
-
FL-Eagle
> 3 dayWas making a work bench for my jointer and planer. Wanted wheels on the bench so I could move them around easily. I was pleasantly antly surprised at how sturdy they were when I unboxed them. The other thing that was nice was the hardware that came with the wheels. I was expecting to have to by sturdy fasteners but no the ones that came with the wheels are fine. I attached the wheels to my bench with no problem. They roll smoothly across the concrete floor in the garage. The locking lever seemed a bit tight at first but with some use they have eased up. Definitely worth the money and would buy again.
-
RivaRat
> 3 dayActually surprised! Built a dolly for a Jet 2244 drum sander and these are the wheels I chose. Easy to move and lock down and not add too much height!
-
Laura Smith
> 3 dayWe put these wheels on an office chair because we needed something that would roll on carpet. The carpet we have is in an extra room in the house so it’s a basic loop carpet and the wheels work great.
-
Merari Pena
> 3 dayLike that its is to lock and easy to move around
-
Bill Fowler
> 3 dayWorks well on my miter saw cabinet, and comes with both bolts, nuts, and washers or lag bolts
-
Mr. D
> 3 dayThese are a bargain!!! Used for a kayaks storage cart and they work perfect ! Would definitely purchase again
-
TRaven
> 3 dayI had a previous set of wheels on a dolly that were were really hard to roll especially if you needed to turn in any direction. This is why I finally decided to buy some of the Weenker swivel casters and make my own dollyl These casters are really great and my dolly will turn and move in any direction very easily. The lock on them is an extra bonus and works easily to hold it in place when needed. Definitely a good buy!