5 Pieces Polycarbonate Sheets Clear Plastic Sheet Thin Rigid Plastic Sheet Clear Polycarbonate Sheet Shatter Resistant Plastic Sheets for DIY Crafts Document Picture Frames (12 x 12 x 0.02 Inches)
-
Abigail Friesen
> 3 dayIf you are looking for something that is 12x12 this is not it. Actual measurements are about 11.8x11.8 (30cmx30cm). The sheet itself is clear but has a blue/green film on both sides to protect it from scratches. Other than measurements being off for all 5 sheets it worked well enough for what I needed it to.
-
Xiang Li
20-11-2024Very clear and transparent, easy to cut, It is the best.
-
Dr. Destiny Rosenbaum I
> 3 dayExcited to try this!
-
Kevin
> 3 dayThese are exactly as described and was exactly what I needed. I was a little hesitant to try them, seeing as how one reviewer said they werent clear. I had purchased polycarbonate film from another retailer (not Amazon) and those were described as clear, but when it arrived it was actually a velvet clear finish (which is a little cloudy) and it had no protective film on it, so I could see some fine scratches from storage and shipping. Thats not what I wanted. I needed absolute crystal clear. So I decided to try these. Bam!! exactly what I was looking for. Clear as glass after you pull off the protective film on each side and no scratches, thanks to the protective film. Perfect! Be aware....They are .020 (20 Thousandths) of an inch thick. Dont expect anything different. If youre not aware of how thick that is...get a set of calipers and look before you buy.
-
Jim V
> 3 dayUsing as license plate cover. They have a blue tint but it us due to a shear protective layer that is removed on both sides.
-
Kate Galway
> 3 dayThe plastic claimed to be clear but was not at all clear. It definitely is cloudy.
-
Timothy Martin
24-11-2024Very disappointed in how thin these are! It’s like a thick piece of transparency.
-
Shelly Buttars
> 3 dayWorked perfectly for my craft project!
-
charles parker
> 3 daywe will see
-
rickinohio
> 3 dayI couldnt find a decent aftermarket lens for my Miller Classic welding helmet and the OEM is just to ridiculously expensive. While the OEM lens is thicker at 1mm, the inner lens is mostly just a dirt shield for the auto-darkening lens and is not a safety feature (thats my opinion). And because the material is so thin, it easily cuts on my paper cutter. You could just as easy use a pair of scissors too. And for $12, Ill probably never have to buy another inner lens. Sheets come with protective plastic on BOTH sides. One side is green and its obvious, but the other side is clear, so remember to peel that side off too!