6 Pieces Needle Roller Bearings One Way Bearing Small Octagonal Bearings Industrial Bearings 8mm Bore 14mm OD 12mm Width with Nice Load Carrying Capacity and Stiffness Bearing
-
Sebastian Cuadros
> 24 hourWorked perfectly, had trouble removing the old one which rusted into the plastic but there are a number of remedies just don’t break the plastic
-
James Westfall
> 24 hourIf your OCedar Spin Mop Bucket has trouble spinning or doesnt spin at all when you pump the pedal, this is is the likely fix if all the gear teeth are good. I have a spin mop bucket that has been in use daily for well over a year. At first it started slipping then quit spinning at all. I took it apart and discovered the one way bearing was very very rusty and had failed. These are an exact fit. Tapped out the old bearing with a small punch and gently tapped in the new one. Also, one end of the bearing is stamped with numbers or writing. That end goes up into the gear. Do not lubricate the inside of the bearing. you can use a little petroleum jelly on the outside to ease assembly. It now spins like the day I bought it. Since it came in a box of six, I should be good for at least the next six years!
-
Candido
> 24 hourThank you.
-
Jessica Wyrick
> 24 hourBought to fix my spinning mop bucket. This was exactly what I needed. Thank you.
-
Anthony Larrison
> 24 hourIt was a perfect match to the original part
-
Mr. E
> 24 hourInstalled with no issue, except for the old bearing. It was stuck.
-
russell r.
> 24 hourWorks perfect for the o-cedar spin mopfixed the no spinning problem without having to buy a new one highly recommended
-
socalnative
> 24 hourUsed it to repair the O-Cedar EasyWring Spin Mop. Now it works as new again.
-
Laquesha P.
> 24 hourReplaced the bearing on my o’cedar mop and it works great just like before
-
Sullly Hansen
> 24 hourrepaired my O Cedar mop ringer and 2 others