6240951 Thma Eng Flush Kit Omc

This product was so bad it was like someone was playing a practical joke on me. I installed this on a brand new Suzuki DF90 A. 1: The slide valve has a small hole that was above where the o ring could seal so it just sprayed water through the hole when the engine was running. 2: The quick connect check valve was installed backwards preventing water from the hose to enter the engine. When I reversed the check valve it allowed water through but when connected to the stem on the slide valve, the stem was too long and prevented incoming water to open the check valve in the quick connect. Solution: I had to JB weld the small hole on the slide valve and buy a Gardena quick connect that fit the slide valve properly. The picture on the ad actually shows a orange Gardena fitting but that is not what you get. I contacted the seller and they never got back to me. Stay far away unless you have a serious sense of humor.

Ive had I less than 60 days . and it broke all ready. Not happy will not buy again.

Got early works great......

This flush kit is too restrictive. It restricts water pressure so much that it doesn’t allow water to flow well through your outboard. I wouldn’t bother buying. If you do buy one anyway, make sure that you check for free returns. You’re probably going to need it.

Gave it one star only because its a good concept however it leaks profusely - returned!!

good quality very good priced

I wish I had read the reviews. Small hole in the male attachment - wont function properly and certainly you cannot leave it in place while running.

Great product

In case youre wondering, yes, it does have the tell-tale stream. I am happy with this device.

I tried to use it on the flush port on the front of my motor. This seems to be designed for motors that need a tell tale (pisser) so there is a hole in the adapter itself that discharges a stream of water into the motor well of my boat. I had to epoxy a small screw into the hole and it works fine now.