Aceteel M8 X 1.25 Metric Hand Tap, Right Hand M8 X 1.25mm Threading Hand Tap 1Pair
-
Ken Kerbs
> 24 hourGreat
-
Luke Schwan
> 24 hourYou get what you pay for. These cheapo pieces didnt even last one hole. First one broke off, totally screwing my project, the second one dulled out before I could even get it 1/2 way through the 1/8 inch plate.
-
Peter Kehagias
> 24 hourSeems to be a class 1 fit at best, very loose. Fortunately the sensor Im installing is pulled tight by a separate locking nut, but I would not use these for anything else.
-
Erick
> 24 hourGreat product
-
R J
> 24 hourUse it to tap threads in header bolt hole on LS engine got the job done.
-
DR Wiehe
> 24 hourPerfect tool for my project
Cutting Direction: Right Hand.
Material: Alloy Tool Steel.
Straight Flute Thread Hand Taps Straight flute design, used for through hole and shallow blind hole tapping, not for blind hole tapping.
Tips
- Before tapping confirm whether the diameter of the round hole is appropriate, and to take protective measures when working.
- When tapping, it is necessary to add water or coolant to cool down to prevent excessive temperature and reduce tap loss. If it encounters difficulty in rotation, the tapping should be suspended.
- Be sure to select the appropriate cutting oil for the complex tapping process and apply anti-rust oil for maintenance after use.
