ANYCUBIC 3D Printer Resin, 365-405nm DLP UV-Curing Resin for Photon Ultra/Photon D2, High Precision and Fast Curing Craftsman Resin for DLP LCD SLA 3D Printing, 8K Capable (Grey, 1000g)
-
Jeffery A. Lee
> 24 hourThe AnyCubic resin is so easy to work with. Like all resin it can be a little brittle, but reinforce parts. Remember that a radius is stronger than a sharp angle.
-
Rick R.
> 24 hourStill trying to figure out a good setup for this resin. It is very thin, Anycubic recommends using lower exposure times but that has not worked for me. I may come back and change my answer but so far it is not doing what they said it would do. Printing many many calibration prints....
-
marc
> 24 hourGood quality printing and perfect if you want to paint the figure later.
-
Arlie Frami
> 24 hourI love my anycubic printer & this is the best resin for it
Usage Notes:
Shake the resin well before use.
Unscrew the cap and add it to the resin tank according to requirements, and select the right settings when using.
After printing, use supporting tools for post-processing, including spatula, diagonal pliers, tweezers, containers, and gloves, Ethanol (≥95%), lactate or isopropyl alcohol cleaning liquid.
Precautions:
1.Keep sealed and away from light at room temperature. Avoid heat or sunlight.
2.Recommended temperature: 18-35℃. The printing effect may be affected if the temperature is too low. The resin can be preheated properly (not more than 60℃) before use.
3.In case of settlement of resin pigment, please stirring or shaking well before use.
4.In order to ensure the desired properties of cured materials, the intensity and time of light source during post-curing should be controlled.Therefore, it is suggested that:
(1)The intensity of mercury lamp or LED light source is 5-10MW /m2, and the duration shall not exceed 1 hour (self-regulation);
(2)The duration of sun exposure (summer) should be controlled at about 1 hour;
(3)Close or long-term exposure under strong light sources such as high-power high-pressure mercury lamp is prohibited;
(4)It is recommended to print in a dark room, or cover when printing.
To ensure successful and perfect printing, please check with user guide in the link for further details.
Brand Manufacturing:
- For freedom to make through 3D printing technology
- ANYCUBIC has gathered a professional 3D R&D team
- Committed to creating a high-quality desktop 3D printer
- Was rated as the "Most Popular 3D Printer Brand"
- 3D technology brings more possibilities to life
ANYCUBIC High Precision Craftsman Resin for Photon Ultra DLP 3D Printer Exclusivity
Photosensitive resin + NanoCeramic
Anycubic developed this DLP Craftsman resin to help makers obtain more detailed 3D printed items. Nano - scale microcrystalline ceramic powders are added , which enhances the scattering of light within the resin, making the resin more sensitive to light and curing finer.
- Wavelength: 365-405nm
- Density: 1.15-1.20g/cm³
- Viscosity: 200-300mPa·s
- Surface hardness: 80-83D
- Tensile strength: 32-43MPa
- Normal exposure: 2-3 s
- Elongation at break: 11-14%
- Molding shrinkage: 4.2-5.5%
|
|
|
|
|---|---|---|
Higher PrecisionBased on ANYCUBIC photosensitive resin,specific proportions of nano - scale microcrystalline ceramic powders are added to make the resin more sensitive to light and get high accuracy prints. |
Low Shrinkage & Fast SpeedPrint with fast curing speed and low shrinkage rate provide the excellent printing experience and effects.And the molding shrinkage as low as 3.7%, much less than some competing products of 7.1%. |
Long Shelf LifeThe other resin on the market has only 1 year shelf life, ANYCUBIC upgraded craftsman resin longer the shelf life to 1 and a half years,to help the resin to store longer and safe use |
|
|
|
|
|
|
|
|---|---|---|---|---|---|---|
| Standard Resin | Plant-Based Resin | Upgraded Standard Resin | Upgraded Water-Wash Resin | Upgraded ABS-Like Resin | Tough Resin | |
| Features | Ideal for Beginners, Easy to Shape, High Rigid, High Precision | Plant-Based, Low Odor, Ideal for Beginners, Easy to Shape, High Rigid, High Precision | Ideal for Beginners, Strength and Toughness are More Balanced, Easy to Print | Easy to Wash, Easy to Shape, Low Odor, No Need Extra Alcohol | High Strength, Excellent Toughness, Bending resistance | Ideal for the Professional, High Toughness, High Impact Resistance, Fast Curing |
|
|
|
|
|
|
|
|---|---|---|---|---|---|---|
| Mini Air Purifier | Wash and Cure Plus | Wash and Cure 2.0 | Photon Mono M5s | Photon Mono X 6KS | Photon D2 | |
| LCD Type | / | / | / | 10.1‘" Mono LCD | 9.1"" Mono LCD | Digital Light Projrction |
| Build Area | / | / | / | 7.87" x 8.58" x 4.84" | 7.7"" x 4.8"" x 7.8"" | / |
| XY Resolution | / | / | / | 11520 x 5120（12K） | 5760 x 3600(6K) | 2560 x1440(2K) |
| Layer thickness | / | / | / | 0.01-0.15mm | 0.01-0.15mm | 0.05mm |
| Z Axis Accuracy | / | / | / | 0.01mm | 0.01mm | 0.01mm |
| Max Printing Speed | / | / | / | 105mm/h or 70mm/h | 60mm/h | 2.5s/layer |
| Material | / | / | / | High Speed Resin or General 405mm UV-Resin | 405nm UV-Resin | 405nm DLP Resin (Better) |
| Max Cure Size | / | 7.48"x9.64" 190x245mm | 5.51"x 6.49" 140x165mm | / | / | / |
| Max Wash Size | / | 7.55"x4.72"x11.41" 192x120x290mm | 4.72"x2.91"x6.49" 120x74x165mm | / | / | / |