Anycubic ABS-Like + 3D Printer Resin, Toughness and Non-Brittle 405nm UV-Curing Resin, High Precision Standard Photopolymer Resin for 8K Capable LCD DLP 3D Printing (Grey, 1kg)

I’ve printed several models with this. The odor is barely there. Smells a little like a dry erase marker but super faint. I’ve had my printer sitting on my kitchen table and printing constantly for over a week now.

The Anycubic brand has been a really consistent product with print time and quality of prints. The White version is really nice and has a nice color hold when painted. Will definitely order agian

So far no bad prints with this resin. Details come out great with with stock settings on my Elegoo Mars. There is almost zero smell and it is easy to work with!

Of all the goos, this is my favorite when it comes to basic printing. I found the standard resin to be very stiff and brittle, while this stuff is closer to plastic I’m used to working with in a modeling context.

This ABS-Like resin is similar to most ABS-Like resins out in the market currently. It prints well, with good detail, and with slight flexibility depending on how long you cure the end product for. The pictures are a tad misleading, as you really wont get that springy flexibility unless you barely cure the end product. However, for most resin projects this really wont matter. I print miniatures on my resin printers for tabletop games, and this resin works fine for that purpose. Like most ABS-Like resins, it has good adhesion, and prints with nice detail on a mono printer. For reference, on my Mars 3 I use an exposure time of around 1.9 seconds. If you are looking for something that is going to be extremely flexible, you might need to add some SirayaTech Tenacious to this resin as a blend. Even an amount as low as 20 percent Tenacious would help tremendously with flexibility. Overall, Id recommend this resin for anybody that enjoys resin printing!

I have been resin printing for a few years now and this has become my go to ABS type resin. Crisp, Clean prints. Very few failed prints and those are more than likely user ID10T errors

Anycubic resin is top quality.

I use this resin specifically for printing miniatures. The prints clean up well, and detail is still sharp. There is still an odor to this resin, though I find it is less than other resins by the same company. I have also found that when printed, items have a little more flex than a standard resin, though they can still break if dropped onto the floor.

First time trying out ABS like resin and suprised i didnt have to adjust my settings at all. The resin smell wise is the same as other brands and the bottle was packaged nicely to avoid leaks. I did a test print and after cleaning and curing i did a few test drops and it didnt break.

As advertised Great product Exactly what it says, it does. Another great product