ARCTIC MX-4 (4 g) - Premium Performance Thermal Paste for All Processors (CPU, GPU - PC, PS4, Xbox), Very high Thermal Conductivity, Long Durability, Safe Application, Non-Conductive, Non-capacitive
-
Christopher C.
> 24 hourI have a I7-7700k which was 80°c minimum during gaming. I bought Artic MX-4 2019 Edition to replace the thermal compound which i previously used and my new compound has dramatically reduced the temperature by at least 10°c if not more.
-
Alana Banks
> 24 hourThe only thing I wish is that it came with something to spread the paste around with. But it was super easy to use and there is plenty for future use too.
-
Mrs. Rosalinda Russel II
> 24 hourHabe die Wärmeleitpaste für die PS4 besorgt, da der Lüfter sehr laut wurde, weil die Kontaktfläche zur CPU nicht mehr gegeben war. Habe nach Anleitung (YouTube) die Wlp getauscht und jetzt läuft die PS4 wieder ruhig.
-
Sudhir kumar
> 24 hourIf seen, the laptop is less hot than before
-
Sammy McLaughlin
> 24 hourTop schnelle Lieferung
-
Buckettruckdave
> 24 hourUsed this to replace the thermal paste on my wifes aging macbook pro, it had been overheating. Used this to replace old crusty thermal paste and the laptop runs nice and cool now.
-
Mr.Q
> 24 hourGreat product for normal build but if you plan on overclocking definitely go a different route. I9-9900x Corsair h150i pro 9 fan catch and pull configuration 5.0 ghz stress test 95c to high when normal gaming 75c -80c gears of war apex cod. Switching paste I’m down to 60 c in heavy load
-
RaMan
> 24 hourIts a paste guys!
-
George Starkes
> 24 hourI bought this because its priced and rated as one of the best. I suppose its working. I smacked it on my new CPU a fees weeks ago and things are looking COOL.
-
Young
> 24 hourI purchased this one (current edition) to apply it to i7-10700k with Dark Rock Pro 4 cooler. Could not handle well when overclocking to 5.1GHZ. The paste is of low viscosity, very watery. Not sure if it is fake. (So many MX-4 sellers from Amazon.com.) Switched to Noctua NT-H1. Now exactly the same configuration, except different thermal paste, i7-10700k rocks at 5.1GHZ with no thermal throttling. Back in 2018 the MX-4 I got was a genuine one, pretty much like Noctua NT-H1, and it was not watery. But this current edition water-like MX-4 is a joke!
|
|
|
|
|
|---|---|---|---|
High thermal conductivityThe surfaces of processor chips and cooler floors are covered with microscopic dents; ARCTIC‘s MX-4 thermal paste is composed of carbon microparticles which fill these cavities. This leads to extremely high thermal conductivity, ensuring that heat is dissipated quickly and efficiently from the CPU or GPU. With its outstanding performance, the MX-4 is not only an excellent choice for overclockers and enthusiasts, but also for other sapplications that require thermal transmission. |
Easy applicationThanks to its consistency, MX-4 is easy to apply, even for beginners. The video in the picture gallery demonstrates the application technique to avoid air pockets between processors and coolers. |
Secure usageIn contrast to pastes based on metal oxides or liquid metal, ARCTIC’s MX-4 is metal-free and not electrically conductive. This eliminates the risk of short circuiting, and eliminates the need to worry about corrosion damage to the radiator floor caused by liquid metal. |
100 % original through Authenticity CheckTo ensure that your paste is genuine, there is the ARCTIC Authenticity Check. This allows every product to be reliably verified. A counterfeit offers neither the performance nor the durability of the original ARCTIC pastes. |
Technical Specifications
Density: 2.50 g/cm³
Viscosity: 31,600 Poise
Volume Resistivity: 3.8 X 10¹³ Ω-cm
Continuous Use Temperature: -50~150 °C
Colour: Grey
|
|
|
|
|
|
|
|---|---|---|---|---|---|---|
| MX-4 | MX-4 (incl. Spatula) | MX-2 | MX-6 | MX-6 (incl. MX Cleaner) | MX Cleaner | |
| Dimensions | / | / | / | / | / | 115 x 115 mm |
| Thickness | / | / | / | / | / | / |
| Continuous Use Temperature | -50~150 ℃ | -50~150 ℃ | 0~150 ℃ | -50~150 ℃ | -50~150 ℃ | / |
| Volume Resistivity | 3.8 X 10¹³ Ω-cm | 3.8 X 10¹³ Ω-cm | 1.22 X 10¹² Ω-cm | 1.8 X 10¹² Ω-cm | 1.8 X 10¹² Ω-cm | / |
| Viscosity | 31,600 Poise | 31,600 Poise | 850 Poise | 45,000 Poise | 45,000 Poise | / |
Related products
