ARCTIC MX-4 (8 g) - Premium Performance Thermal Paste for All Processors (CPU, GPU - PC, PS4, Xbox), Very high Thermal Conductivity, Long Durability, Safe Application, Non-Conductive, Non-capacitive
-
Anselmo Antonio
> 3 dayOttimo prodotto, gracile da stendere, ottima resa!
-
flora foini
> 3 dayla verità ,ero un pochino scettico rispetto a questo articolo, lo consideravo al pari delle solite paste termoconduttrici es (pasta siliconica ecc.) ma dopo aver sostituito appunto la pasta siliconica su un pc che avevo assemblato da alcuni anni e che dava segni di surriscaldamento con alcune applicazioni impegnative, con relativi blocchi del processore. Mi sono dovuto ricredere, le temperature sono nella norma, ed i blocchi spariti. Veramente un ottimo prodotto.
-
Alejandro Pardo
> 3 dayExcelente
-
Edoardo
> 3 day-7 C° alla GPU in full load rispetto alla vecchia pasta termica. Penso sia superfluo aggiungere altro.
-
Razvan Viteazu
> 3 dayBought it several times and will buy it again in future.
-
Erick
> 3 dayEasy to clean and good to use on older GPUs that need fresh new thermal paste.
-
Gunnar
> 3 dayGute Leistung bei einer sehr ergiebigen Menge. Würde ich wieder kaufen.
-
Anderson Julian Vásquez Sierra
> 3 dayMuy buen producto
-
Alessio Leo
> 3 dayProdotto arrivato in uno scatolo con dentro la confezione un po ammaccata però perfetto! Consegnato in anticipo rispetto alle previsioni.
-
Gabriele
> 3 dayHo acquistato questa pasta termica per applicarla sul mio datato ma sempre funzionante FX-8320. Essendo OC le temperature erano sui 50/55°C in idle. Dopo lapplicazione di questa pasta termica la temperatura media si è ridotta a 45/50°C quindi un ottimo risultato.
|
|
|
|
|
|---|---|---|---|
High thermal conductivityThe surfaces of processor chips and cooler floors are covered with microscopic dents; ARCTIC‘s MX-4 thermal paste is composed of carbon microparticles which fill these cavities. This leads to extremely high thermal conductivity, ensuring that heat is dissipated quickly and efficiently from the CPU or GPU. With its outstanding performance, the MX-4 is not only an excellent choice for overclockers and enthusiasts, but also for other sapplications that require thermal transmission. |
Easy applicationThanks to its consistency, MX-4 is easy to apply, even for beginners. The video in the picture gallery demonstrates the application technique to avoid air pockets between processors and coolers. |
Secure usageIn contrast to pastes based on metal oxides or liquid metal, ARCTIC’s MX-4 is metal-free and not electrically conductive. This eliminates the risk of short circuiting, and eliminates the need to worry about corrosion damage to the radiator floor caused by liquid metal. |
100 % original through Authenticity CheckTo ensure that your paste is genuine, there is the ARCTIC Authenticity Check. This allows every product to be reliably verified. A counterfeit offers neither the performance nor the durability of the original ARCTIC pastes. |
Technical Specifications
Density: 2.50 g/cm³
Viscosity: 31,600 Poise
Volume Resistivity: 3.8 X 10¹³ Ω-cm
Continuous Use Temperature: -50~150 °C
Colour: Grey
|
|
|
|
|
|
|
|---|---|---|---|---|---|---|
| MX-4 | MX-4 (incl. Spatula) | MX-2 | MX-6 | MX-6 (incl. MX Cleaner) | MX Cleaner | |
| Dimensions | / | / | / | / | / | 115 x 115 mm |
| Thickness | / | / | / | / | / | / |
| Continuous Use Temperature | -50~150 ℃ | -50~150 ℃ | 0~150 ℃ | -50~150 ℃ | -50~150 ℃ | / |
| Volume Resistivity | 3.8 X 10¹³ Ω-cm | 3.8 X 10¹³ Ω-cm | 1.22 X 10¹² Ω-cm | 1.8 X 10¹² Ω-cm | 1.8 X 10¹² Ω-cm | / |
| Viscosity | 31,600 Poise | 31,600 Poise | 850 Poise | 45,000 Poise | 45,000 Poise | / |
Related products
