ARCTIC MX-4 (8 g) - Premium Performance Thermal Paste for All Processors (CPU, GPU - PC, PS4, Xbox), Very high Thermal Conductivity, Long Durability, Safe Application, Non-Conductive, Non-capacitive
-
Domenico C.
> 3 dayAvevo già comprato la MX-4 anni fa, e scoperto il suo ottimo rapporto qualità prezzo. La nuova versione è rimasta fedele alloriginale! Ho risolto inoltre i problemi di temperatura sulla gpu a seguito dellapplicazione del waterblock con la pasta termica fornita (perliamo della ek, non cinesieria!), passando dai 70° su cui la gpu andava in thermal trottling (nonostante il downclock e lundervolt e nonostante abbia applicato la pasta 2 volte, pensando ad un problema di applicazione) agli attuali 67° in overlclock... che dire, si conferma la pasta migliore di sempre.
-
Kaansiiii
> 3 dayDie Wärmeleitpaste kam sehr schnell an und war relativ minimalistisch verpackt. Das auftragen war sehr leicht und die Paste hat eine sehr gute Wärmeleitfähigkeit. Verglichen zur Mx5-Paste gibt es kaum unterschiede und preislich lohnt sich diese hier mehr. Definitiv eine Kaufempfehlung.
-
TheDoctor
> 3 dayPc Xbox ps approved by the doctor!
-
frapeo
> 3 dayRecensione in ritardo ma posso dire che ad oggi il computer rimane acceso dal mattina alla sera senza problemi
-
Werq_88
> 3 dayGuzel
-
Ed
> 3 dayThis is my go to thermal paste. I never buy anything more expensive or cheaper than this. This is a staple in my home office.
-
Daniel Delgado Jiménez
> 3 dayMuy buena marca calidad precio
-
Nico Perera
> 3 dayArriva il tubetto, lho preso da 8g ma basta anche quello da 4g. Facile da mettere e non sbrodola. Consigliato per utenti nuovi nel cambio della pasta termica. Consiglio di metterne pochissima al centro così da non far casini distribuendola in modo non omogeneo. Mediamente otterrete cali dai 5 ai 15 gradi
-
Jason Stein
> 3 dayI have an Ibuypower laptop that started shutting down for overheating, and booting to black screen more and more frequently. I opened it up, removed all the heat sync lines, scraped off all the hard old paste, rubbed contact points clean with rubbing alcohol. Placed a glob in center of all contact areas, and spread it out. put it all back together and its been running beautifully.
-
Ed C
> 3 dayArctic has always made good thermal paste for computer builds and has been the go to for many enthusiasts over the years. This paste is no different. For the price you get PLENTY of paste to apply multiple coolers to processors. However, prior to purchasing this I did not know that it was NOT recommended for OverClocking, and the Arctic Silver 5 is the better paste from Arctic for running an Overclock. I really think that should be advertised as such, that doesnt take away from the quality of this paste, as not everyone runs an overclock, its just something that people who are really running an OC should know. I dont consider running your CPU within its unlocked boost clock range as an overclock, as its a preset unlocked frequency but going beyond the normal preset unlocked capability of your CPU is an OC. I would suggest AS5, Noctua thermal paste or Kryonaut for any real overclocks.
|
|
|
|
|
|---|---|---|---|
High thermal conductivityThe surfaces of processor chips and cooler floors are covered with microscopic dents; ARCTIC‘s MX-4 thermal paste is composed of carbon microparticles which fill these cavities. This leads to extremely high thermal conductivity, ensuring that heat is dissipated quickly and efficiently from the CPU or GPU. With its outstanding performance, the MX-4 is not only an excellent choice for overclockers and enthusiasts, but also for other sapplications that require thermal transmission. |
Easy applicationThanks to its consistency, MX-4 is easy to apply, even for beginners. The video in the picture gallery demonstrates the application technique to avoid air pockets between processors and coolers. |
Secure usageIn contrast to pastes based on metal oxides or liquid metal, ARCTIC’s MX-4 is metal-free and not electrically conductive. This eliminates the risk of short circuiting, and eliminates the need to worry about corrosion damage to the radiator floor caused by liquid metal. |
100 % original through Authenticity CheckTo ensure that your paste is genuine, there is the ARCTIC Authenticity Check. This allows every product to be reliably verified. A counterfeit offers neither the performance nor the durability of the original ARCTIC pastes. |
Technical Specifications
Density: 2.50 g/cm³
Viscosity: 31,600 Poise
Volume Resistivity: 3.8 X 10¹³ Ω-cm
Continuous Use Temperature: -50~150 °C
Colour: Grey
|
|
|
|
|
|
|
|---|---|---|---|---|---|---|
| MX-4 | MX-4 (incl. Spatula) | MX-2 | MX-6 | MX-6 (incl. MX Cleaner) | MX Cleaner | |
| Dimensions | / | / | / | / | / | 115 x 115 mm |
| Thickness | / | / | / | / | / | / |
| Continuous Use Temperature | -50~150 ℃ | -50~150 ℃ | 0~150 ℃ | -50~150 ℃ | -50~150 ℃ | / |
| Volume Resistivity | 3.8 X 10¹³ Ω-cm | 3.8 X 10¹³ Ω-cm | 1.22 X 10¹² Ω-cm | 1.8 X 10¹² Ω-cm | 1.8 X 10¹² Ω-cm | / |
| Viscosity | 31,600 Poise | 31,600 Poise | 850 Poise | 45,000 Poise | 45,000 Poise | / |
Related products
