ARCTIC MX-4 (incl. Spatula, 4 g) - Premium Performance Thermal Paste for All Processors (CPU, GPU - PC, PS4, Xbox), Very high Thermal Conductivity, Long Durability, Safe Application, Non-Conductive
-
Holger Kruse
> 3 daymacht was sie soll
-
Robert B Mitchell
> 3 dayEasy to use with spatulas included. Replaced 8 year old paste with this and the baseline run-time temp dropped almost 15 degrees while the run-time spikes were eliminated.
-
Tonebone
> 3 dayI bought this and a new fan to lower the operating temperatures of my aging laptop. It was very easy to apply and works well at keeping my core temperatures 30+ degrees C less than before. If you desktop / laptop is older than 7 years - you should really apply new thermal paste. The excessive heat can destroy your ram and motherboard.
-
Antonio
> 3 dayLas puse en un procesador de gráfica que siempre lo tenía por 90 grados, fue ponerla y magia ya no sube de 65 a plena carga
-
Austin ONeall
> 3 dayI love it. Works great. Tried the thermal graphite pad that I saw on Linus Tech Tips but the temps just crept up to high. Cant go wrong with good thermal paste.
-
Jungle
> 3 dayGreat thermal paste.
-
Aaron Orosz
> 3 dayI was nervous to use it but it was easy to use and the instructions where easy to read.
-
Jahmen Myst aka Jahman Myst
> 3 dayIt works really well. Easy to use. What more can one say about thermal paste.
-
Johnny Alvarez
Greater than one weekWorks flawlessly. You do need to follow the installation procedures otherwise it will an ordeal
-
Tariq Wahab
> 3 dayAfter changing to this thermal paste my switch has been a lot cooler, the tube wasn’t as big as I thought it would be but it’s still enough to do my laptop and switch two times over
|
|
|
|
|
|---|---|---|---|
High thermal conductivityThe surfaces of processor chips and cooler floors are covered with microscopic dents; ARCTIC‘s MX-4 thermal paste is composed of carbon microparticles which fill these cavities. This leads to extremely high thermal conductivity, ensuring that heat is dissipated quickly and efficiently from the CPU or GPU. With its outstanding performance, the MX-4 is not only an excellent choice for overclockers and enthusiasts, but also for other sapplications that require thermal transmission. |
Easy applicationThanks to its consistency, MX-4 is easy to apply, even for beginners. The video in the picture gallery demonstrates the application technique to avoid air pockets between processors and coolers. |
Secure usageIn contrast to pastes based on metal oxides or liquid metal, ARCTIC’s MX-4 is metal-free and not electrically conductive. This eliminates the risk of short circuiting, and eliminates the need to worry about corrosion damage to the radiator floor caused by liquid metal. |
100 % original through Authenticity CheckTo ensure that your paste is genuine, there is the ARCTIC Authenticity Check. This allows every product to be reliably verified. A counterfeit offers neither the performance nor the durability of the original ARCTIC pastes. |
Technical Specifications
Density: 2.50 g/cm³
Viscosity: 31,600 Poise
Volume Resistivity: 3.8 X 10¹³ Ω-cm
Continuous Use Temperature: -50~150 °C
Colour: Grey
|
|
|
|
|
|
|
|---|---|---|---|---|---|---|
| MX-4 | MX-4 (incl. Spatula) | MX-2 | MX-6 | MX-6 (incl. MX Cleaner) | MX Cleaner | |
| Dimensions | / | / | / | / | / | 115 x 115 mm |
| Thickness | / | / | / | / | / | / |
| Continuous Use Temperature | -50~150 ℃ | -50~150 ℃ | 0~150 ℃ | -50~150 ℃ | -50~150 ℃ | / |
| Volume Resistivity | 3.8 X 10¹³ Ω-cm | 3.8 X 10¹³ Ω-cm | 1.22 X 10¹² Ω-cm | 1.8 X 10¹² Ω-cm | 1.8 X 10¹² Ω-cm | / |
| Viscosity | 31,600 Poise | 31,600 Poise | 850 Poise | 45,000 Poise | 45,000 Poise | / |
