ARCTIC MX-4 (incl. Spatula, 8 g) - Premium Performance Thermal Paste for All Processors (CPU, GPU - PC, PS4, Xbox), Very high Thermal Conductivity, Long Durability, Safe Application, Non-Conductive
-
José Ramón Martínez Quinteiro
> 3 dayTodo perfecto.
-
lorenzo
> 3 dayTrès bon produit
-
Giacomo
> 3 dayIl prodotto è semplice da applicare, l’ho utilizzato su un portatile per sostituire la pasta termica originaria, non ha dato però il risultato sperato, nessun abbassamento di temperatura significativo, tuttavia non ha peggiorato la situazione
-
IVAN
> 3 dayfácil de aplicar, no necesita curado y buen rendimiento. llevo mucho usándola, es la que mejor resultado general me ha dado.
-
Kagali Outha
> 3 dayBest Ive used.
-
Ahmed
> 3 dayGood product but slow shipping
-
Toni
> 3 dayViene sin espátula, estafadores
-
jacob
> 3 dayI was seeing temps in the high 80s (C) at the GPU with my new RTX 3080. The temps I was seeing, while certainly within the spec ranges, are really close to the upper limit. Using some content I found on YouTube, I was able to disassemble my graphics card, clean the dried up factory paste, and replace it with MX-4. I now see maximum temps in the low 70s (C) even with the heaviest loads I can generate.
-
Sergio Rodríguez
> 3 dayMe llegó con un empaquetado fatal, parecía ya usado, la caja rota como mojado pero bueno al abrir el producto y revisar la pasta térmica parecía estar en perfecto estado, la eche en el portátil msi ge60 2pc apache tanto en el microprocesador como en la gráfica y por ahora se calienta menos y todo genial, quitado el defecto del empaquetado estoy satisfecho.
-
Hector
> 3 dayI had a slightly old budget laptop that has been overheating for the past few days. After applying some of this to the CPU, its like a night and day improvement. My games are back to 60 fps which hasnt been the case for a long time. Cant ask for more than that.
|
|
|
|
|
|---|---|---|---|
High thermal conductivityThe surfaces of processor chips and cooler floors are covered with microscopic dents; ARCTIC‘s MX-4 thermal paste is composed of carbon microparticles which fill these cavities. This leads to extremely high thermal conductivity, ensuring that heat is dissipated quickly and efficiently from the CPU or GPU. With its outstanding performance, the MX-4 is not only an excellent choice for overclockers and enthusiasts, but also for other sapplications that require thermal transmission. |
Easy applicationThanks to its consistency, MX-4 is easy to apply, even for beginners. The video in the picture gallery demonstrates the application technique to avoid air pockets between processors and coolers. |
Secure usageIn contrast to pastes based on metal oxides or liquid metal, ARCTIC’s MX-4 is metal-free and not electrically conductive. This eliminates the risk of short circuiting, and eliminates the need to worry about corrosion damage to the radiator floor caused by liquid metal. |
100 % original through Authenticity CheckTo ensure that your paste is genuine, there is the ARCTIC Authenticity Check. This allows every product to be reliably verified. A counterfeit offers neither the performance nor the durability of the original ARCTIC pastes. |
Technical Specifications
Density: 2.50 g/cm³
Viscosity: 31,600 Poise
Volume Resistivity: 3.8 X 10¹³ Ω-cm
Continuous Use Temperature: -50~150 °C
Colour: Grey
|
|
|
|
|
|
|
|---|---|---|---|---|---|---|
| MX-4 | MX-4 (incl. Spatula) | MX-2 | MX-6 | MX-6 (incl. MX Cleaner) | MX Cleaner | |
| Dimensions | / | / | / | / | / | 115 x 115 mm |
| Thickness | / | / | / | / | / | / |
| Continuous Use Temperature | -50~150 ℃ | -50~150 ℃ | 0~150 ℃ | -50~150 ℃ | -50~150 ℃ | / |
| Volume Resistivity | 3.8 X 10¹³ Ω-cm | 3.8 X 10¹³ Ω-cm | 1.22 X 10¹² Ω-cm | 1.8 X 10¹² Ω-cm | 1.8 X 10¹² Ω-cm | / |
| Viscosity | 31,600 Poise | 31,600 Poise | 850 Poise | 45,000 Poise | 45,000 Poise | / |
Related products
