AUPREX 5 Pack 4 Inch Twist Knotted Wire Wheel Brush for Angle Grinder with 5/8 Inch-11 Threaded Arbor - 0.02 Inch Carbon Steel Wire for Heavy-Duty Conditioning for Various Metals

I know, you get what you pay for. These are “ok” I just wanted something to eat up some surface rust on my undercarriage- these worked, but you definitely want more than just safety glasses. The little individual “fibers” break off pretty quick and fly everywhere. If you just need to knock out a quick job- these are fine. If you were hoping to keep these around after- not going to happen.

Worked real good the only thing I didnt like the wire ends got bent over on a couple of them and made it vibrate was able to get a little straight with pliers then worked better

heavy duty, helped a lot

These work well but eye protection is ABSOLUTELY MANDATORY. They fling steel wire everywhere and when I grind in a t shirt snd shorts (I’m lazy) I find metal wires sticking out of my skin. Not a big deal on my knees but a big one in my eyes. The wheels last about 30 minutes of continuous use.

Very poor quality wire wheels. I was doing the same work cleaning rust/welds/removing paint as I have many times before with the same grinder and these wire wheels were unbalanced and lost their metal bristles unlike any that I have ever seen. I was picking out little wires from my shoes, pants, shirt, and sweeping them up all over the garage. I think I used about 5 of these when I would have used 2 of the last ones I bought, but the unbalance and projectile wires was just not worth the cost savings. I wont be purchasing this brand again. The only good side was that I could remove them them with channel locks rather than a thin wrench that I am always looking for. when switching between the wire wheel and the grinding wheel.

So far these have worked out great for corrosion and rust removal on steel. The wires are tightly secured in the cup and so far do not fly out.

I am in the throughs of restoring a tractor and needed to remove old paint and rust. The wire brushes and sanding wheels do the job well. I bought these particular ones because the price was better than other sources. I would buy then again.

Much better quality than expected for the price.

At first I thought these might be a bit too coarse; I was wrong. I find the flatter ones are cupped just slightly and work quite well. I used them on metal that I had blasted with walnut shells and these were able to clean up a few areas quite well.

Item arrived with only 4 of the 5 brushes! :(