Benedict Harry 4Pcs Internal Wheel Weights for 1/10 RC 1.9/2.2 Beadlock Wheel Rims

Fit perfect in aluminum bead lock wheels, good where you need it. Resembles disk brakes, good weight.

Initially my SSD wheel hubs didnt fit inside the wheel weights. There was a difference of maybe 1 mm. I just took a 1/4 bolt and nut and put my wheel hubs onto the bolt and then into my drill and then spun it while running it against my belt sander. Stopping frequently to check fitment, it didnt take long to get them to fit very nicely without taking too much material away from the hub. The screws that came with them were the wrong size for my hubs but the originals worked just fine.

These fit perfectly on the Injora 1/10 scale beadlocks (1.9”). Can’t really see the grooves in the “brake surface” but that’s because of my rims. They’re smooth and clean, and heavy too. Should work well.

They have helped my front end SO much.

Added some nice weight to my Redcat Everest 10. It climbs a lot better now! Would definitely recommend.

These do not fit in any way on my redcat gen 8 scout 2. Do not purchase for redcat

Product is as described, if you are using ssd wheels you will need to sand hubs down to fit inside the brass weight. It’s not a big deal, only took me about and hour to get them all modified and mounted. Also includes screws will not fit. With some effort you can use the factory screws. Overall they work great.

My SSD hubs did NOT fit in the inset part of the weight altho my Vanquish hubs fit VERY nice and the holes were just right but then I went to put the screws in and they are to big for both the SSD and the Vanquish hubs so you will need to get longer screws that are the right mm.

I’ve purchased three sets of these now. Fit on SSD, Spec, Treal, No name, and VP wheels. I had to mod them a little fit Capra axles. But still work great and add great forward weight.

Was supposed to be a 4 piece set and only 2 were delivered...