B&M 80775 Unimatic Automatic Shifter , Black

I baught this set for a truck that i am building the box was a little beat up but when i opend it the shifger looks fine it was missing the GM lever and Bracket but amazon fid an amazing service of making it right i give amazon 5 stars on the customer service

Remove the neutral safety switch, slide the supplied Ford shift adapter onto shaft and center it up on the existing shift lever and mark the new hole on existing lever. Then drill out new hole, 5/16 and slightly wallow out hole to allow the threaded connector to rotate in hole drilled. Then countersink so connector can sit deep enough to allow cotter pin to be installed. That is hardest part. Once the threaded connector is ready then use the template to remove the carpeting and cut out the floor. Really just on the flat of the hump about inline with the last rear screw of the transfer case shifter is a good spot. About 2 inches to the side give or take. Use some washers to fill in the space from the old shifter cable that will be removed and you can use the original bracket to mount new cable down on the trans. Works great, all gears are right on and neutral switch works just like it should.

Offers that old school look and attitude, with a manual shift appearance that always was appealing. It’s got a smooth action shift with each selected automatic transmission gear choice. Very well designed and easy to install.

Easy install, works good with a LS 4L60e swap in my Squarebody BUT doesn’t lock into gears well at all (as other have stated). You could easily push it into reverse or park or any other gear just by pushing hard enough (which isn’t hard at all really). With that being said it’s simple, functions and seems to be made well. Looks great and sits decently high for a truck shifter. If they just make it alittle more secure in each gear and alot harder to put into reverse and park (almost like a lockout) then it would probably be the best shifter for the money on the market period

Great looking product just like all of the thing I have got from B&M. It came with all the brackets and then some like Ford and Chrysler brackets. Very happy with it.

Rebuilding old truck shifter worked great

Good quality

B&M unimatic shifter works well. you do need this to be depressed to go into revetse& park. i sithi anove itso its easy to accidentally push down. i need extention, for car perfect, truck not so much.