Cable Matters OFNP Plenum Multimode Duplex OM3 Fiber Cable 3.3 Feet / 1m (40Gb 10Gb, LC to LC, 50/125 Fiber Optic Cable, Fiber Patch Cable)
-
Dtek2k
> 3 dayWorks Great! Shipped fast!
-
Matthew T. Karlsson
> 3 dayThe cable works. No problems. Nothing much else to say.
-
Matthew
17-11-2024worked great/ used this to run a ubiquiti poe switch out to my detached garage for my cameras/had to run about 80ft/ this is run through conduit buried in the ground and to switch using sfp modules on both ends/has worked flawless/ would recommend
-
Tech Guide
Greater than one weekI found these patch cables to work reliably, completing my fiber connection without issue. They can be easily changed from straight through connections to crossovers where needed. As a first timer installing fiber I was worried that I would break one of these when changing to a straight through connection, but that wasnt an issue for me. No broken connections and easy to install. The caps work to keep the ends clean until needed. I am happy with how these performed.
-
accc1
> 3 dayNice!
-
Ms. Vergie Ankunding DVM
> 3 dayWorked as expected, cable quality seems good.
-
Brian G
> 3 dayGood product
-
Yoav
> 3 dayThe cable came folded so hard it got briken inside! If you dont know how to pack optic cable donot sell it! Update: They contact me and resend the order. This time it came up fine. Thank you.
-
John B.
> 3 dayGood Product
-
Brad
> 3 dayI bought 5 of these patch cables and all of them worked great!
10 Gigabit Performance for Critical Connections
The Cable Matters LC to LC Multimode 50/125 fiber cords are OM3 rated for the extreme demands of SAN networks. They are precision factory tested for insertion and return loss to ensure transmission performance according to TIA-568-C.3 specifications. The combination of LC connectors in a protective yoke, strain relief boots and zirconia ceramic ferrules provides a dependable, low-loss performance.
Plenum Safety Rated
The OFNP (plenum) rating conforms to strict NEC building safety codes but is compatible with unrated or OFNR (riser) rated applications.
100% Factory Tested with Small Form Factor LC Connectors
Each cable is tested in the factory to meet quality control and insertion loss requirements. Save labor cost and troubleshooting time with these fiber cords that are ready to use.
Full-Featured OM3 LC to LC Multi-Mode Fiber Cord
- Easy to identify yellow and white boots with 1 & 2 ring makers
- Slim-profile strain relief boots provide durability and flexibility
- Adjustable yoke un-snaps to reverse polarity
- Removable dust caps prevent dirt from reaching the fiber
Bend Insensitive Engineering
- Bend insensitive multimode fiber (BIMMF) provides greater flexibility in tight spaces or long cable runs with multiple bends.
- BIMMF fiber cable is engineered with an extra layer of glass around the core to ensure optical performance and provide durability for the extreme requirements of SAN network or high-density patch panel installations.
- Protect your network against macro-bend losses that are difficult to isolate, troubleshoot, and repair.
Adjustable Yoke with A & B Labels
- Classification: OM3 LOMMF
- Core/Cladding: 50/125 Micron
- Wavelengths: 850 nm
Superior Materials
- Duplex zipcord with 2.0mm legs (2.0 x 4.0mm)
- Aramid yarn strength member
- Ceramic ferrule for precise alignment
Plenum Jacket Fire Safety-Rated
- Safe in plenum air spaces
- Meets UL 910 requirements
- Substitutes for OFNR riser
|
|
|
|
|
|
|---|---|---|---|---|---|
| Cable Matters 120007 | Cable Matters 120005 | Cable Matters 120009 | Cable Matters 120019 | Cable Matters 120015 | |
| Form Factor | LC / LC | LC / LC | LC / LC | LC / LC | LC / LC |
| Fiber Type | OM3 | OM1 | OM4 | OM5 | OS2 |
| Bandwidth | 40G | 10G | 100G | 100G | 10G |
| Jacket Rating | OFNP (Plenum) | OFNP (Plenum) | OFNP (Plenum) | OFNP (Plenum) | OFNP (Plenum) |