Case Compatible with Phomemo M220 Label Maker Printer, Portable Storage for Bluetooth Barcode Sticker Makers Machine, Mesh Pocket for Labels Tapes, Thermal Paper Roll and Charging Cable (Box Only)

This works well for holding your Phomemo printer and has plenty of room to hold extra labels, cables, etc. with the printer. I will say it does not work as their picture shows because if you try and place the printer in the case like that it will slightly bulge the case. Overall it works as expected and allows me to keep everything together and organized.

This holder was a little roomy for my M04S, but I guess if I had some additional tapes to shove in there it would help. I think it would be better if there was a removable divider in there so you could fit your printer and tapes snuggly. Currently, my printer is jostling around. Also, the case is off balance as one side is bigger than the other, but the handle is attached to one side only. So it is a bit lopsided. Overall, it protects my printer and gives me a way to carry it around, but could be improved.

All of these form-pressed cases have an awful chemical smell to them. The smell is so bad it will get onto whatever you put inside then onto your fingers. Im having a little success using a 5 gallon bucket with a lid to get rid of the smell. Load the bucket up with some smell absorbing material (you can get some at auto parts stores), then put your case inside and let it sit for at least 3 weeks with the lid closed. Then remove and leave out in the garage for 2 more weeks. Make sure the case is open/unzipped so the inside gets some air. So into the bucket this went last night and Ill check in 3 or 4 weeks from now. The sizing is accurate to the description, and the case is nice looking. I thought the zipper was pink but its more of a mauve (subdued pinkish-purple). The case feels nice, zipper works good, and I like the one side having a mesh covering for all your smaller parts/rolls. I failed to take a picture with our label maker inside but it fits ok. We actually have a 2nd smaller label maker I was hoping would fit inside as well but its a little too big for both at the same time. The wife is looking forward to using this once the chemical smell has been removed.

This case is so roomy you can almost fit 2 label printers. The outside zipper seems pretty smooth and the little zippered pocket inside is great for keeping your charging cable and smaller labels contained so they dont roll around all over the place. You may not have extra label rolls to fill that empty space near the printer so an elastic strip or something that will keep the printer in place would be a nice addition.

Kind of disappointed in this storage case for my Phomemo M220, because: 1. If I put in my m220 the way its shown in the listing photos, it pushes and distorts the shape of the case, because the length of the m220 is longer. I dont want to permanently distort the storage case, so I am putting it in on its side, like Ive shown in my photos. 2. The stitching on the handles is poor. The tension is off, so the stitches are loose, particularly where the handle meets the case. Ive shown close ups of what Im talking about. Im not confident at all to carry this case, when its loaded up with my printer and a ton of rolls in this case. I got this case to keep all of my rolls and my printer together, and so that I can easily take this with me to my craft shows that I vend at thoughout the year. Super disappointed with the quality. Its a shame, since the case itself is pretty. Its once you start looking at it closely, and actually trying to fit your machine into it, do you realize that you either got a bad one, or this is just how they are. Im not bothering to get another, Ill just have to keep this storage case inside of another bag when I take this with me to shows. Verdict: I wouldnt recommend this.

This works great to store the M220 label maker and plenty of rolls of paper along with a USB cable. It.s made of decent quality material. The zipper is a little rough, but overall a decent carrying case for the M220.

The case does a good job in holding your printer and rolls. The material is soft and looks good. It is not a rugged case and would advise against mistreating it. I have other cases which you may throw around without worrying about damage but this one has nicer more soft material. Case is alt larger than it needs to be but will store plenty supplies. Thank you for taking the time to read my review and photos of this product. I hope it has been helpful in providing you with more information.

It’s a little bigger than I thought, but it fits everything & you still have a little room. I put a rubber band on my labels because they kept rolling around when I would pick the case up. I love the handle & the white leather is very pretty. It’s stitched & made very well & holds label maker, labels, & room for a few more accessories.

When I received this label maker case, I was surprised at how big it is! Its a lot bigger than I thought it would be! The pictures of this case advertised online, made it seem like it was smaller in size, but Im happy that its as big as it is! Its got extra space for storing labels, the charging cable, and other rolls of thermal paper, etc. I was really disappointed when I looked at this case closely! I noticed a bunch of flaws on the outside of this case! I may have received a case that was part of a bad batch, I dont know for sure. I just know about the one I received. I took pictures up close of all the dents, cracked pieces of the shell, and all the spots of cracked and wrinkled paint. Hopefully you can see what I mean in the pictures I posted above. It is awful! I dont know why this case has so much damage to the outside of it, and I wonder if it will even protect my label maker machine. I will still probably use this case, just hope it does its job. Time will tell on that! Overall, I was really excited about how big this case was, and then so disappointed when I saw the outside of the case up close! From my experience, with getting this particular case that is low in quality, and very poorly made, I would NOT RECOMMEND THIS PRODUCT!

Its a great little case for my M220 label maker. Solid construction and a semi-rigid rubberized body help protect the label maker, but I havent drop-tested it yet to confirm how much protection itll offer. Features handy storage for manuals and cables. Only downside is the lack of padding inside to keep the printer in place; I placed my spare labels to fill the void because otherwise the printer likes to bounce around in there.