





Corsair Vengeance RGB Pro 32GB (2x16GB) DDR4 3200 (PC4-25600) C16 Desktop memory – Black
-
Aldo Moya Domínguez
> 3 dayLas mejores del mercado
-
Rosebud82
> 3 dayThis item arrived on time. My son is very happy with it. Great purchase, no problems. Would buy from this seller again.
-
lyuxiaoyu
> 3 dayproduct in perfect condition!
-
Christine L.
Greater than one weekDer Arbeitsspeicher macht was er soll. Da ich nichts an seinen Einstellungen verändert habe kann ich nichts zum übertakten sagen.
-
Stefano Piancastelli
> 3 dayRam semplice, estetica e ad un prezzo raggiungibile.
-
Kenneth
> 3 dayAt first I was really frustrated with this kit as it refused to run at the rated 3200mhz, when I enabled DOCP. The highest they would run at was 2800mhz. The solution for this issue was changing slots. With my board at least, the ram preferred to be in slots a2 and b2 (as shown in my picture). After changing slot it worked perfectly. If you have issues with this kit running at 3200mhz try changing slots first.
-
SALVO
> 3 dayHo comprato delle DDR4 CORSAIR VENGEANCE RGB PRO 16GB (2x8) 3600 MHZ C18 per sostituire delle DDR4 CORSAIR VENGEANCE LPX 3200MHZ C16, in configurazione XMP il sistema ASROCK Z590 PG VELOCITY CPU i5 11400f li riconosce senza problemi impostando i parametri di fabbrica 3600MHZ con i time previsti dal produttore , avviandosi senza nessuna instabilità .Purtroppo le prestazioni generali sono inferiori alle precedenti DDR4 VENGEANCE LPX portate in over clock a 3600 MHZ.
-
Briana Demers
> 3 dayHonestly the Ram Itself is great, I will say though it definitely isnt plug n play like alot of other ra. The First hurtle that by default the mhz is set somewhere around 2100 to truly achieve the 3600 as advertized you have to go into your bios and clock it up to 3600 mhz and up your voltage from 1.35000 to 1.40000 or 1.450000 instead of it being set to auto, as well as this set in the bios when doing the overclock to not set to Manuel or auto but if your using intel set to xmp i or xmp ii. If the voltage is too low then you might just have an infinite boot cycle like I did at which point you just power off your pc, I would also recommend if you dont have a really powerful cpu then boost to 3333 mhz instead of 3600 until you upgrade, I have a I7 8700 and I had to go down to 3333 mhz until I upgrade to my I9 9900k in a month or two. It sounds more complicated than it is trust me but overall I recommend the ram 100% if you configure it correctly. The last complaint I have is the Icue software can be a lil tricky for setting up rgb if you aint doin simple affect but once you figure out layering with the lighting effects its all good,
-
Tony
> 3 day1 stick of ram arrived faulty. Very disappointing since I spent extra money to get Corsair because I was doing my first high end pc build and wanted higher quality products. Ended up refunding and buying a 32gb kit from teamgroup and ram has worked perfectly. Will not be buying from corsair again as you pay a premium and apparently do not get a premium or even functioning product.
-
ricardo valdeblanquez
Greater than one weekLa estética