D&L 5 Inch Plate Casters Wheels 1800lbs Heavy Duty Casters with Brake Polyurethane Dual Locking Casters Set of 4 (Two Hardware Kits) DL-I5-001

Very well made with the strength to support heavy items.

While I really like these casters, this is the third set of them I have purchased, they come with NO grease in them. Not in the swivel or the wheel bearings. Greasing the swivel is easy enough with a grease needle on the end of my grease gun. However, the wheel bearings are a little more involved to get them greased. First, you’ll need to remove the nut and bolt that holds the wheel to the swivel. Then with a very small thin blade screwdriver you need to pop the metal grease seal out of the bearing it WILL deform only slightly even if you take your time. You need to pry from the inside edge only. Trying to remove it from the outside edge WILL destroy it. They are very thin and fragile, but it can be done. Once the seal has been removed, you can use the same grease needle to add some grease, or just pack some in with our fingers. Once it is packed, very carefully press the seal back in, and reinstall the wheel on the caster. The first two sets that I purchased have not been greased yet, as the dollys that I put them on are only used twice a year, and at the time I did not know they had no grease in them. I will add some when I use the dollys again this spring. I’m not sure how long they would last if you don’t add grease, but now that I have, I expect a much longer life span than without.

I bought these to build a pwc dolly to hold my wave runner so I could store it in my garage for the winter to work on and move around easily. The posted weight bearing for these wheels really got my attention. Well over 1000 pounds capacity for all 4 wheels

I built a welding table for my final project in my welding class measuring 48x30 and half an inch think surface. Weights about 600-700 pounds total. These wheels support it easily and enable to the table to roll around with ease and stay in place when the wheels are locked. Good value for the money and love the color

1960s toolbox, finally changed the casters on it. Rolls and maneuvers well. I LIKE IT.

I bought these to make my own shop/detailing seat. All of the ones I found available for sale had problems. A high price tag was the number 1 problem. Seat height was next because most of the seats I found were just too high. I shouldnt have to bend over while seated. Then there was small wheel size since I planned on using this in the driveway where the surface is rougher and could have any number of objects dropped from trees or tires. Finally the quality varied dramatically with the price. Fortunately I already had pieces of plastic sheet lumber from another project. I wanted that because its very durable and water will never be an issue. The seat will primarily be used for detailing. I cut two rectangles. I mounted the wheels to the lower one. I used 2x4s to figure out the height I wanted. They were the perfect size, were treated for exterior use, and would be tucked in so it seemed like a logical solution instead of cutting more plastic pieces. Then the top piece went on and I routed the edges. Its not the prettiest thing Ive ever built but this was an exercise of function over form and I know this will get bumped and beaten around the garage. I also put pieces on the bottom to hold the top in place if it was screwed on. I might use this to roll other things around and wanted it to be an easy changeover. Now that Im done telling you about my project Ill tell you about the wheels. They stunk when I opened the box so I suggest opening it for the first time outside. They are solidly built. The included bolts were the perfect length to attach my sheet. The wheels rotate and spin freely and smoothly. The locks are a little difficult to engage and disengage but they work great. I couldnt have asked for a better set of wheels for my purpose. In my driveway they roll like they are on glass. I have to admit Ive ridden my seat down the driveway a couple of times so they are good for recreational uses also. I would definitely recommend these.

Absolutely LOVE these casters!!! Have tried many different ones and really got tired of disassembling everything to replace or fix broken and bent wheels. Insert these heavy duty casters. They are amazing! They roll extremely smooth, lock tightly and will support a crazy amount of weight. In the above pick my mobile wood shop station is around 800 pounds and the wheels support and roll with ease. I can be very difficult to please and I love these wheels. You won’t be disappointed!

I have used these on a sandblasting cabinet, solvent tank and a bolt organization bin. (Industrial size) They work great and are priced well

Work very good as expected. Good price. So far, working good and solid.

I bought two sets of these wheels to build a cart to support our new hot tub. It is 950 lbs and we had to move it about 80 feet to where it was going to be placed. I used plywood as a surface to roll across the yard but with these wheels it moved almost effortlessly. One of the guys helping me kept saying they couldn’t believe how easy it was rolling. These wheels are definitely very sturdy, roll smoothly and worth the money if you need to move something heavy.