This is an awesome product that works if you throw away the included cheap junky screws and go buy some good screws at the hardware store

I agree with some of the other reviewers here as far as the cheap drill bit and screws provided. I purchased mine just before Christmas 2019. I ended up CAREFULLY using the drill bit but I can see how it might snap. I installed the door jam plate with #10 3 Spax screws -- see pics. The heads protruded out as far as the set screw head, so if your door closes with the set screw it should close with the #10 Spax screws. You could probably use a slightly smaller screw but thats what I had handy, and they have a great reputation for holding. I also used the same screws to replace some of the preexisting short 1 screws in the door jam. I never did use the cheap zinc screws provided with the Door Bull over fear of stripping or snapping, plus I desired a beefier screw. Im pretty happy with the product otherwise.

Would recommend this for added security.

Great Product! Makes me feel secure and safe! Of course I installed it on a SOLID wood door… not a multi pane glass door (now that would be silly, wouldn’t it?) And I’ve already told my family if they know I’m in the house and I’m not answering calls and have been MIA and this is keeping them from getting in my house, They have my permission to break a window to gain access. LOL

I wanted to secure my outside basement door, which is a very heavy and solid wood door; the kind they just dont make anymore. The Door Bull was easy to install in literally 5 to ten minutes. It fits just snug enough and really secures the door. It provides that added security in addition to the existing knob lock and dead-bolt. Really a solid and ingenious device. With the three 3-inch screws going deep into the door jamb, the Door Bull provides a very wide latching area that is almost three times the surface area of the dead bolt alone. Anyone trying to kick in the door will have to shatter the door and the jamb to splinters before the door can be compromised. Great product. I will be ordering a second one for the garage door.

This secures my master bedroom door. It’s easy to install and easy to use. I replaced the short screws in my door hinges with the longer screws included with the Bull. The Bull is well made and strong, and it is a backup to my locks, lights, and cameras. The one improvement I would recommend is for the channel to V-out wider at the bottom to guide the bull onto the flange make it even easier to move between the door and the storage and back. I have several styles of door barricade and this is the one I use to protect me and my my wife while we sleep. The Bull is good value for the price. I highly recommend it.

Once I installed this device, along with several superior long screws, I find that with my normal deadbolt and this device, that it would take a pretty strong assault to gain entry. I feel confident that a simple 200 pound kick will not gain entry. Ive had to kick doors in, and usually the side molding and small screws into the 2 X 4 framing is what gives way. This clearly distributes the weight in a much wider (leverage) manner will require a much more vigorous assault to gain entry. A little pricey in my opinion but is far superior to another deadbolt or comparative assembly.

PROS: - Installation relatively simple, under the right conditions. - Extremely non-invasive option. Sleek / smart design. - Very good option for doors with limited space. - Should provide occupants with more time to protect themselves. - May deter the vast majority of intruders due to increased time and effort needed to gain entry. - The hanger is a good idea and helps to keep the device available at all times. - Installation can lead to awareness of other potential weak spots (that would otherwise go unnoticed) CONS: - The price point is slightly high. Worth the investment, but may deter some from purchasing. - Screws provided strip far too easily. Do not use them. - Dependent on integrity of door installation. - Calculating installation depth of base can be tricky. - Can require a higher than average aptitude for construction. - Only works for in-swinging doors. This is not a big deal, but is important to know. - The makers of this device need to have more videos available showing the capabilities of their product. Many other devices have videos from various sources testing them. This one does not. The lack of sponsored and independent test videos almost prevented me from purchasing the device. RECOMMENDATIONS: - If you have an older home, or are not handy (in terms of construction) get an experienced person (friend, family member, trusted handyman) to install it for you. - Use star-head screws purchased from hardware store (or Amazon!). This is an absolute MUST! - You will need a relatively powerful drill. - Watch YouTube videos and install 3 - 4 screws into hinge-side of door as well. Use caution, this can alter the doors ability to close properly. MY EXPERIENCE: Thankfully, I have some experience in home improvement and construction. I installed The Door Bull on two of my entry doors. The front door went relatively smoothly. I did notice, that if you have the means and desire that a person could install more than one of these to a door, potentially increasing the effectiveness. When I went to install it to my metal garage side entry door (a door I thought was the most secure in my home), I found that it was improperly installed and very vulnerable to blunt force. I had to remove the trim and place additional wood in the gap between the door frame and the wall stud. I then had to use 4 screws to ensure a solid connection from the frame to the stud. This is not a knock on the Door Bull. In fact, I was able to correct the problem because of the Door Bull. Now, that door is very secure. This device will not prevent entry into your home. It may effectively slow entry and/or deter entry. I have recommended it to my family members and friends.

I bought this late last year and only recently got around to opening the box and installing it only to realize that the bracket you put the plate on when not in use is missing. Its been too long to return so Im reaching out to the seller to see if they will do anything to help me out. As for the install, I found that I couldnt close the door with the set screw in place so I had to do my adjustment with the door open but it came out alright. I didnt find the mounting hardware overly cheap but I suggest using a hand tool to install the screws (after drilling the holes) because they looked like they might strip out with a screw attachment on a drill. Ill update this review when I find out if the seller is willing to fix the missing part. Update - I reached out to the seller and a day later they contacted me and offered to send me the missing part. With that kind of service they earned more stars.

Took me around 5 to 10 min to install (recommend to watch youtube video). Excellent design, light weight, and very sturdy. Comes with all the required hardware and drill bit. 10X efficient than the dead bolt. Fell much safer. Very happy with the purchase.