Eapele Undermount Sink Repair Kit, Sink Brackets for Quick and Easy Installation for Fallen Sink Support

Does the job to support sink. Not too hard to install.

These brackets work great! I loved the design and the ability to tighten them up a little after install. I set mine about 3/4 travel so I could lower the sink, apply sealant, then tighten again. I used double backed tape on the flanges to hold the brackets in place while installing the mounting screws. All worked great with no problems!

Im a granite fabricator, from now and on i will provide lifetime warranty in undermounted sinks using this brackets

After researching a lot of products to repair my sink that had come loose from the granite countertop, I chose this particular one. It was easy to install, the directions were clear, and did the job. I don’t know why contractors don’t use these instead of just gluing a sink in place. Overtime, the glue will come apart from the Undermount and the result will be a fallen sink. Thank goodness we noticed this before it ripped the plumbing out.

My sink barely fit the cabinet. There was an 1/8+ gap where water leaked through. These pushed the sink back into place tightly eliminating the issue. Be sure to clean out the old caulk and reapply before tightening into place.

Simple to use. Works great. Holds sink up very securely.

A sink that had lost its original under outer bond

Our sink fell away from the granite worktop, these worked well to secure it back in place. Were a bit tricky to install, and a lot of swearing and huffing and puffing was involved...but got there in the end.

Great in helping helping hold up a sink where the standard epoxy adhesive holders did not always work

Pretty easy install. Marked 2 holes and drilled. Attached with 2 screws, drilled other holes and attached with final 2 screws. Spread silicone around sink top and gently tightened evenly. Seems to be very solid after 24 hour dry time for silicone. Would recommend and use again if I ever encounter another dropped sink.