ECHOGEAR Tilting TV Wall Mount for Up to 86 TVs - Maximum Tilt Range On Large TVs - Great for Mounting TV Above A Fireplace - Easy Install & Hardware Included

I recently bought a monster 75 tv for our new house and its doing just as it should. Much better than spending tens-hundreds more on another model.

Solid construction and easy to follow directions. You will need a stud finder!

Was so excited to get this product when we got our new house. I have to say I was not very impressed especially for mounting above a real fireplace. Very hard due to the bracket design.

The bracket is of excellent quality and comes with ample hardware to install it to drywall with wood studs, including 3 lag screws and a plethora of bushing sizes. However, for my specific tv [Samsung Q80R] the correct spacers were not included with the EchoGear parts, but were included within the tv instructions and remote plastic roll-up pouch which I didnt bother to check, which wasted time.

This is a great buy. The wall plate’s max stretch is 16”. The template that comes inside the box makes it very easy to mount the wall place. I was able to put two vertical screws on a stud but because my studs are spaced 24” apart I had to install the other two screws on the drywall. I got a couple drywall anchors and it works great! The mount is holding my 50” Vizio TV. The wall clearance is great to access the ports at the back. It swivels left and right if you want to slightly turn it. The tilt is very nice; perfect to adjust the viewing angle of a TV mounted slightly higher on the wall.

Excelente producto muy fácil de instalar

Easy to install and gives plenty of motion

I love the tone of this brand. Really friendly and fun. And on top of it, as I mentioned in the headline, the product is very sturdy, very stable, very well thought through, and it just works VERY well! I have a 65” TV mounted to it. I am able to easily (literally with one gentle hand) swing it from side to side, Im able to easily adjust the tilt. The leveling ability (after youve hung the TV) is really good - although if you plan carefully enough youre not likely to need it. (Im a little bit OCD and so all I needed was one full turn of the Allen key so that the bubble in my spirit level is EXACTLY dead center). I literally cannot think of one bad thing to say. One caution I will mentioned is FIRST buy yout TV, and see where the bracket will fir on your TV. ON modern flatscreens, the mounting positions are often situated in the lower half of the TV, and not centered (top to bottom). Why is this noteworthy? Because if you’ve pre-planned what height you want your TV on the wall, you might end up changing the height of you mount, to accommodate the position of the mount holes. I mounted mine to a horizontal wood beam that serves as a sort of a mantle above a disused fireplace, so my mount height was determined for me, but you can see how the height of the mounting points on the back of my TV affected my placement.

I am not a big writer of reviews as the day after I receive an item is way too soon to be asking for a review of the item and its very annoying. There are so many fake reviews out here on Amazon that its a crap shoot as to what is real, it feels. With all of this, Im going to tell you that this is by far, the best, most complete and easiest mount I have ever installed. Do not listen to any negative reviews as they probably didnt follow the simple directions which are not entirely necessary if you have half a brain. They are great though. The mount hss the template that is spot on. Level it, tape it to the wall and you are 99% finished with the brains part of this process. Drill your holes, hold your new mount up and use an impact drill to tighten your bolts down. Screw the hangers on the back of the TV snug, not overtight ( which side up, only 1 way makes sense here). I took a couple mesurements on the back of the TV as to where center was ss to how low from center the TV would hang below the mount. If the height is where you want it, or is allowed, then hang the TV. Insert the screws on the bottom, make sure the TV is level and then tighten those screws. If one size is lower than the other, lift the one side of the TV a little and screw the appropriate side in further. Its that simple and really couldnt be more simpler. The mount has a great swing out feature to allow access to the back of the TV where the connections go. Adjust your angle, tighten up the knobs, and swing it back to the wall. The bottom of my TV is 4 1/2 from the front of the TV to the wall. There you go. My honest opinion of a great product. Highly recommend and will buy again should the need arise. I hope this helps someone.

Wirks great