Eco-Baeerss Tap and Die Set Metri_c and Standard M14 X 1.5mm Tap Die Set Right Hand

Did exactly what I needed in fixing the thread on a Honda 3-wheeler axle where the castle nuts are screwed on. Thanks.

Item as described and worked flawlessly. Would buy again if need be.

This tap broke before I finished one hole . I’ve only broke 2 other taps in 22 years In trades and both of those had tapped countless holes and were extremely well used so this thing really missed the mark . Im also stuck trying to remove low quality broken tap from my part

Both the tap and the die clean up the treads nicely. I used the tap to clean up the female threads in cast iron. I used the die to clean up the threads on the bolt.

Worked as expected.

Needed this tool to recut the threads on the bolts and holes of an engine mount. They were stripped from entering at the wrong angle. Using some cutting fluid made them spin on super easily. Great product that solved a big problem.

The tap is HSS; however, the die is not HSS and is soft with many attached machining millers on the threads.

Tap worked ok die busted second time using it to chase threads on flywheel bolts.

Worked great better then spending 70 plus on snap on

Good buy