ELEGOO ABS-Like 2.0 3D Printer Resin 1kg Grey, Rapid Precise Printing Resin 405nm LCD UV-Curing for LCD 3D Printer

The test print that came on the flashdrive wth my Saturn 2, printed near flawless! I had to make a few settngs corrections when printing with supports. The settng that worked for me on my Saturn 2 were: Bottom exposure 35 sec, exposure time; 2.8 sec, lft speed 60, Retraction speed 188-200. This was the Elegoo ABS-like Smokey Black.

Container lid came with a hairline crack. I noticed it the moment I got it. I tipped it upside down and squeeze nothing came out so I thought it was good but the seal broke and leaked everywhere wasting a lot of resin. Uncured Resin is not a fun thing to clean up. Wish the product had a better quality container.

I try other more exotic resins but this one of my favorites.

As always this product performs at the highest standards. I cant complain in the slightest about this product.

Ive been using this in my Saturn S with great success. Works well, produces parts which are strong (at least by the standards of resin 3d printers) and doesnt seem to be any more noxious than any other Ive used.

This resin is fantastic. I am almost afraid to sing the praises too much because it is reasonably priced and will probably sell out lol. I use my Photon Mono and details come out crisp, the prints are reasonably strong and not brittle. For settings I am 4 base layers with a base exposure time of 60 seconds. My layer height is 0.05mm with an exposure time of 4 seconds. The only “con” is that this resin is not particularly low odor but you should wear a respirator and nitrile gloves whenever working with resin. Please work with resin in a well ventilated area away from where people or animals are consistent.

By far the best grey resin I have used

This is great. My husband and I have ordered this particular resin several times. It works well and has good results from the printer. The only down side is there is a odor with using this resin. It is not overwhelming, but good to be aware if using around a person sensitive to odors. Odor is not present once printing is done.

I like using this resin always works good

Still horrible support removal ease; but much better than their standard resin, which is garbage. Fairly durable, but extremely water absorbent, which leads to warping.