ELEGOO Water Washable 3D Printer Resin LCD UV-Curing Resin 405nm Standard Photopolymer Resin for LCD 3D Printing 1000Gram Ceramic Grey

Needed a resin that didnt stink up the basement as much as other resins, read that this was the type that kept the odor to a minimum. Bought and yeah, the odor was less intense but there was still an odor. Regardless the print quality was A+ for me, then again Im still a beginner with resin printing.

As a modeler and miniature painter this is my go to liquid resin. It’s very low odor and easy water clean up. I have used a regular liquid resin and the smell was unbearable. Don’t get me wrong this does have an odor. But it is low odor and won’t fill your whole house with a chemical smell. I don’t have a dedicated hobby room so I get my 3-D printer out and print what I want to print and then put everything up. So usually I’m running my printer on my dining room table. The older doesn’t fill the whole house. Just for informational purposes my resin 3-D printer is a Creality LD 002H. It regularly goes on sale a little cheaper here. You just have to keep watching for the price drop. Usually when I catch it a little cheaper. I’ll buy two bottles at a time. I go through a bottle every four months that doesn’t seem like a lot but I paint everything I print before I buy another bottle so I’ve been using this resin for probably a little over a year. That also tells you that it has a decent shelf life after opening. I’ve seen no deterioration in my prints from the first print out of the bottle to the last. Just make sure you keep your lid tight when you store it. But don’t tighten it too tight because the top cap sometimes will crack. Pros… Very reasonable price. Low odor. Water clean up. Comes in a variety of colors. Has a good shelf life after opening. Cons… None really. The only trouble I have had is on a few of my bottles if you tighten the cap to tight it cracks at the very top of the cap. So when you go to shake the bottled up it will leak out if it is cracked. That’s not really the product tho. That’s the packaging. Overall, if you’re into 3-D printing and using a liquid resin, this is a good reliable resin.

*Edited review* I was able to talk to customer service and we talked about the issue I ran into and they helped me troubleshoot and find something that works for me. Absolutely great service, and a lovely brand as a whole. Im glad they stand behind their products and are very capable. *Original review* Ive used all the other colors with great success, but the red fails every time. I even tested it by printing the same thing on the same printer with different resin colors. All the others printed great, but the red failed multiple times, with no success.

Its works good but its brittle.

Im very new to resin printing but this is the second bottle of this water washed resin I have. Altho several of my prints may have been fails none were because of the resin. It works welll and it is MUCH easier to clean the model, print head and reservoir. It has my recommendation.

Works better than normal resin in my opinion. Not sure why the bad reviews. Either they got a dull batch or their settings dont match the resin.

Expensive

My first sla printer using it and successfully printed a demo. Price is great

This is one of the few resins my Halot One has no issues with. Great resin

I received the resin printer for Christmas and have been printing on and off for almost a half year. A few hiccups on a few prints. But I learned about temperature of the room and resin. Easy to use and the water washable aspect is great for beginners in printing.