EZends 1.5 Inch Square Tubing End Cap Plug, 10/14 Gauge, 8 Pack, Durable Black Plastic LDPE, Chair Glides, Furniture Floor Protector, Chair Leg Caps,
-
Michael Schmidt
> 3 dayThey fit great!
-
tom blair
> 3 dayLovem,I use lots of them and reorder often
-
David C Stolingwa
> 3 dayI ordered for my wine barrel stands. I have 2 half barrels cut length wise on metal stands in my garden. I had wasps making nests in the open tube ends. Having them capped off solves the problem. However I should have ordered 10 instead of 8. Pay attention to both inner and outer measurement so you get the right fit. I had to use a mallot to get them in and it looks great.
-
Kathy Aaron
> 3 dayThe reason for the low rating of this item is that it didnt fit the tubing I needed them for. They were of good quality, but didnt fit. The sizing of them was a bit confusing so to what I needed.
-
John D. Estepp
> 3 dayThese square end cap plugs are exactly as described. They go in easy with a rubber mallet and a set of 8 of these end cap plugs (on the 4 legs) with a can of spray paint turned my small work table frame from a rusty piece of metal going to the metal recycling bin to a usable work table frame.
-
Kirk Taylor
> 3 dayLike very much. Used on kayak trailer.
-
John
> 3 dayI used these end caps in 1 1/2 X 1 1/2 square aluminum tubing that were the legs of a heavy duty step stool. That fit very tight, but once pounded into the legs fit and looked perfect. These prevent the legs from scratching a floor surface and also prevent the stool from sliding. Great product.
-
mike
Greater than one weekI used these in a cart I fabricated and they worked great. Nice snug fit, had to tap them in with a mallet so I think they’ll stay put and not fall out!
-
Athena Deane
Greater than one weekExactly what I needed and the price is great. Fits perfectly in 1.5 14 gauge square tubing.
-
joseph goss
Greater than one weekTHESE WERE OF GREAT QUALITY AND WE RECIEVED THEM QUICKLY!!
1.5 inch x 1.5 inch 10/14 gauge durable end cap plugs. Perfect for commercial and home projects
Description
1.5 inch 10-14 gauge square tubing plastic end cap plug
- Package quantities 50,30,20,8 pieces
- Important Only fits square tube inside diameter 1.23 inch - 1.33 inch
- Fits square tube outside diameter 1.5 inch x 1.5 inch
- Has proof of size(10/14 Ga) embedded on the side of cap
- Designed with flexible ridges for easy install and multi fit range
- Has many general uses: chair glide floor protector, fence post end cap or plug, fitness equipment, tubing and pipe end caps for finished clean look
- Works with 10-14 gauge tubing or pipe
- Material heavy duty black LD polyethylene UV weather resistant will not rust, peel, chip or corrode.
- Hardness durometer 50d
- Max temperature 150 degrees fahrenheit
How to measure your square tubing
HOW TO MEASURE 1.5" TUBE OPENING OR INNER HOLE - Fits square tube inside hole or opening - (from 1.23 inch up to 1.33 inch) or (from 31.29 mm up to 33.88 mm). IMPORTANT: Will not fit a (1.5" inch or 38mm) inside square hole or opening.
HOW TO MEASURE 1.5" TUBE OUTER DIMENSIONS - Fits square tube outer dimensions (1.5" inch or 38mm). IMPORTANT: Will not fit a (1.5" inch or 38mm) inside square hole or opening.
Fits tube wall thickness from 10 up to 14 gauge.
Used for many commercial and small project applications
Multiple applications
Multiple applications - Used for many commercial and small project applications such as chair leg ends, fitness equipment, fence post end caps, square pipe or tubing, finishing end cap plugs for fabrication projects, automobile and accessories.
Used for many commercial and small home projects
