Flexible Heat Resistant Silicone Rubber Sheeting, High Temp,Smooth Finish, Red 1/8 by 12 by 12 inch

seem well made and plenty thick for oven use .

Easy to cut and form for gasket

I have cut out and replaced nearly every gasket on my pellet stove with this product. The thickness and durability of this silicone aids in its ability to seal. It cleans easily with soapy water and when both surfaces are clean there is a slight adhesion affect. It definitely sticks to flat side plate covers when they are removed for cleaning. Removed, cleaned and reinstalled these gaskets at least 12 times this past winter. Besides some discoloration, they are no worse for the wear.

Cela fait tres bien l.affaire. Merci

The silicone pad came rolled up in a tight circle. This means my pad does not sit flat on my heat transfer machine. It sits with either a curve down or up depending on what side I use. There is also a shiner film like surface on one side. Not very nice. It works fine to help increase the pressure on my small bonder but would consider another brand if looking for another sheet.

This product has no adhesive backing, so stickiness is not actually rated, but the Amazon system doesnt understand how to deal with that.. This is a high quality silicone rubber product. Very heat resistant, which is what I needed. I held a soldering pencil against the surface, set a7 700°F, and it does not mar the surface of the rubber. Thickness is a uniform 1/8 as specified. Excellent stuff, everything I expected, and a reasonable price as well.

Had I ordered the correct item, it would’ve been perfect. The quality is terrific

Needed to fabricate a stove Jack for Montana Elk hunt. This fit the bill! Extremely easy to cut with a utility knife. Kept the cutout and am using it for a hot pad in the kitchen. Works great!

If youve ever used a brake pressure bleeder then you know youve got to have a perfect seal between the bleeder top and the master cylinder reservoir. Well, there are a number of master cylinder reservoirs out there (re: Wilwood) that no bleeder top exists for, and since many of the cars that come through our shop have Wilwood brake systems we decided to make our own custom bleeder top, and the silicone sheet was used to make the gasket. It works perfectly and since its silicone the brake fluid wont eat destroy it. I also liked the variety of size choices they had available, it made finding what we needed much easier.

Well made product that works well for my application. 3 mils thick, very durable.