Fuji Spray 7020-4 M-Aircap Set #4 for Semi-PRO and Hobby-PRO

Perfect size for a little more pressure and even spray when working with thinned our latex.

Did a much better job than the 1.8 that came with spray gun. Spay droplet size makes a hugh difference with oil based paint.

Great buy

If you intend on running water-borne paint, acrylic, and/or heavier water-borne finishes through your Fuji do yourself a big favor and order this. It makes a DRAMATIC difference in getting the perfect wet coat with no orange peel or overspray. I rarely use the tip that came with the Fuji Semi-Pro2 anymore (in fact, IMO Fuji should use the #4 tip as the standard given the needs of most DIYers). Installation is a snap, if you own a wrench you will have it in your HVLP in about 3 minutes. It is a high-quality item, you can tell it was manufactured to precise tolerances. My review on the Fuji Semi-Pro 2 has more info if anyone is interested in that system. So far Ive sprayed the following products through this with professional results: 1. Zinnser 1-2-3 (and about 4 other Zinnser primers, I get them confused); 2. Benjamin Moore Impervo (the old oil-based kind); 3. Benjamin Moore Regal (flat up to semi-gloss); 4. Behr exterior primer plus paint (flat) (BTW this is a nice paint for paint-grade wood projects); 5. Water-borne stains and polyurethane. The days of me hand painting furniture and trim are over.

Works perfect

Good product, cleans easy,sprayed great

Awesome product....You just can’t get anything better than Fuji products.

Fuji might do little margin on the spray gun, but it does extra high margin on the Aircap Sets.

worked fairly well using latex house paint but still had to thin the paint more than i wanted to.

Expensive, but does the job.