

































[Green] Colored 10G SFP+ DAC Cable - Twinax SFP Cable for Cisco SFP-H10GB-CU3M, Meraki MA-CBL-TA-3M, D-Link, Supermicro, Netgear, Fortinet, 3-Meter(10ft)
-
Brack
> 24 hourBought 3 of these so far and pleased with the quality they work great!
-
Cosmo
> 24 hourUsing this cable to connect two servers with 10GB SFP NICs to a MikroTik 5-Port Desktop Switch CRS305-1G-4S+IN. Worked great out of the box, no issues. Cable is well made and a great value.
-
Martyn Bader
> 24 hourFor my first foray into 10Gb networking for my home lab, I chose this manufacturer for all my NICs & cabling to go with my Mikrotik CRS305 router (in switch mode). Happy to report no issues, everything is generically compatible and I was enjoying 10g speeds right out the box (verified with iperf and line speed SMB transfers to a TrueNAS box I also outfitted with a 10GTek NIC and one of these SFP+ DACs. I will not hesitate to buy my next round of 10Gb networking gear from this manufacturer, great quality and price.
-
Brian S. Schieck
> 24 hourgodd cable
-
CC
> 24 hourI tried to use this to connect between a Ubiquiti US-16-XG and a Cisco 3560 series switch. I set the 16-XG to 1gb mode to ensure both sides are operating at 1gbps. Although the DAC is advertised as widely compatible with Cisco, I was unable to get the link to work on the Cisco side.
-
SomeGuy
> 24 hourWorks no problem
-
Roger Whitehouse
> 24 hour*Edit* Turns out my Switch only supports 1Gb SFP while the UDM pro supports 10Gb. Auto negotiation failed however forced to 1gb works. So rule of thumb dont blame the cable and check to make sure your SFP devices are actually SFP + rated
-
Grant
> 24 hourUsing to link a Unifi dream machine to a unifi link agregation switch at 10 gb and then from the sfp+ 10gb link agregation switch to a sfp 1gb port on a unifi 24port switch without any problems.
-
David Maciel
> 24 hourCumple con la funcion, se ve buen material y me ha trabajado muy bien.
-
St4rsup
> 24 hourUna vez recibido el paquete e instalado el dispositivo, nada funcionaba. Sin ambargo, luego de mirar en la configuración de mi gateway y del switch, era necesario activar la negociación de paquetes a 1Gbps, luego de eso el cable funcionó sin problemas y de forma eficiente.