

Green Grease 101 Synthetic Waterproof High Temperature Grease, 14 Oz. Tube
-
J. Oliver
> 3 dayLoaded it in my OTC grease gun. Works well for automotive and ok marine. If it has a zerk it gets this. A pretty good all purpose grease.
-
Stephen E.
> 3 dayGreat grease, lasts long!
-
John
Greater than one weekLOOKS LIKE A GOOD PRODUCT
-
Eddie
> 3 dayI use this to grease my zerks on my atv, works very well as I ride through water a lot while riding
-
Andrew
> 3 dayBeen using this for a while now after my first use (see below) on the boat, and it really is very waterproof, it does not wash away for a very long time. So my first use of this was on a refrigerator condenser fan motor that just has oil lite bushings, but after 17 years the bushings started wearing out and the fan would chatter and sometimes not spin at all. So the first time I took the fan motor apart, i threw some el cheapo lithium grease on the the shaft/bushings, put it together and re-installed. 3 weeks later, started chattering again. Took it apart, went to auto parts store, got some Mobil Syn bearing grease, lubed it up and put it together. Lasted a little longer, about 2 months later the chattering was back. One last try... went back to auto parts store, guy said this green grease was pretty good. Cleaned and re-lubed the motor shaft/bushings with the green grease. About 2 months went by, no chattering, but was ready to replace motor and had one sitting in my Amazon cart. 6 months go by, no chattering. Fan still working great. Kept the fan in the saved for later cart. 1 year goes by... NO CHATTERING. WTH!!?? Double checked the fan, yep, still air coming out! WOW. Finally started chattering about 2 months later, that lasted a whole year longer than the Mobil synthetic grease! After that I figured i got enough use out of that and didnt feel like tearing it apart again, even if it was for a year, so I just replaced the fan motor. But ever since then Ive been sold and now use it for everything. Mostly wheel bearings.
-
diehlr1
> 3 dayWorks very well on wheel bearings. I took a wheel bearing off to change a rotor. The bearing had been packed two years ago, it looked like it had just been done. Great product.
-
Carlos
> 3 dayGreat shipping and great product
-
brandon ragains
> 3 dayUse this on all my YJ jeep fittings. Its great for off road use without worrying about it getting washed away going through the creeks.
-
Jorge R.
> 3 dayBest Grease that I have use Hands Down and what I like the Most ? That this Grease is Thick not like others that I have used this would stay wherever You put , Simply is The Best.
-
Carrie Franecki
> 3 dayWater resistant