INTELLIMADE, Acrylic Sheet Plexiglass 12 x 12 Square Panel 1/8 (3mm) Thick, Cast Plexi Glass Board with Protective Paper for Signs, DIY Display Projects, Craft and Easy to Cut, 1-Pack, Clear

I bought these as a shield to protect the door. But I can only imagine a bunch of things that they can be used for such as signs, creating display boxes, protect the sales, countertop and much more. As with plexi glass this is thin so be careful that you don’t snap it. It has worked out perfect for my project.

It simply doesnt worth the money. I expect much better quality than it offers, with such a high price tag. I look through the review and believe that its a game-changer, but unfortunately, its a normal table sheet with terrible quality.

The sheets arrived well packed and in perfect condition. The clear protective film worked great. The sheets are scratch free! I use 3mm acrylic in my 40 watt laser cutter and usually have no issues. This brand has been incredibly hard. Far more passes to get it cut. I’ve never had this issue before. I decided to test cut a few other brands 3mm to make sure my laser was still aligned. It cut fine. Swapped to this and man…..it’s tough. This brands acrylic sheets also produces a lot more smoke than I normally see. Not sure why. Overall it’s a good product. For the price the size is average. I can recommend for a 40 watt laser, unless you have all day to cut one piece. If you aren’t planning to cut with the hobby level laser it’s probably a good acrylic! Definitely sturdy, well packed, good color saturation, slightly larger than most “12 inch” sheets

This is perfect plexiglass. I was making a frame with it, using glass on the front and the INTELLIMADE Acrylic Sheet Plexiglass on the back. After having assembled my frame, with the frame clips that I invented, I noticed that I liked the look of my artwork underneath the plexiglass, rather than the glass I used for the front. I will use the INTELLIMADE next time and ditch the glass.

Beautiful shiny black acrylic that cut so easy with a CNC cutter and can be used for so many different purposes would definitely recommend and use over and over.

I was looking for acrylic sheet to do a small project for thanksgiving, this one is perfect! Much better deal than the local store! Will come back for more if I run out.

In searching for inexpensive yet sturdy and easy-to-clean material for my mini mill bed covers, found this 2 piece set of Plexi-glass to fit my need-Score! Plex is always easy to cut, sands, and polishes nicely for the end product. I attached pieces of 1/2 aluminum channel to the bottom areas to fit into the T-Slots of the mill bed. The Amazon 5/16 magnets were inserted in end milled holes on the bottom side of the rear sections for a bit of additional holding power. This simple addition allows me places to set tooling and other stock on the bed, without damage or falling into the T-slots. Clean-up is so fast and easy now, no swarf in the T-slots, simply vacuum it off and done. The small magnets additional advantage is the collection of steel swarf, again easier for cleanup. I left the paper on the top side to eliminate slippage of objects placed on the bed, not falling to the floor.

Cuts great with a co2 laser. I do wish that it had a paper cover material rather than plastic as its hard to tell if you have removed it. The plastic cover also tends to shrink back leaving it useless as a paint mask.

Item was of notable quality! Exceptionally tasteful packaging. Speedy delivery. Seller is excellent.

To small