













Jewboer Sand Blaster Gun,Sandblasting Sandblaster Gun Kit for Sandblast Blast Cabinet with Ceramic Nozzles
-
Fred Meine
> 3 dayGreat replacement part for media blast cabinet.
-
James E.
11-06-2025cleaning some rusty tools worked great
-
Anna Flemon
> 3 dayGreat cheap gun for a home owner/DIY. I like that it comes with changeable tips. Extra tips can be found at harbor freight. Needs a large air compressor.
-
Joe
11-06-2025Pretty decent gun, works well. No wear to the tip yet so should last awhile.
-
Lonny Hayes
> 3 dayAmazing how much material it will take off. I tried a large siphon hose and then discovered a smaller diameter one works better. It came with the right hose adapter. I wasnt able to adjust it to shut off air flow completely.
-
Joshua Walters
> 3 dayThis is a low end gun and has needed at least an hour of repairs while only using it about 2 hours. It wasnt assembled correctly when I received it (massive air leak through nozzle). After fixing the misplaced O-ring, it worked until the whole trigger assembly fell apart. We have had to put the trigger assembly back together twice now after about an hour of sandblasting between repairs. Do not recommend.
-
bernard bedney
> 3 dayIt barrely works Bernie B
-
Elise Welch
> 3 dayIf you’re cheap like me and bought a horrible freight blasting cabinet and are getting ready to throw it away, don’t! The junk gun they give you is the problem and this is a perfect fix for it. No clogs, great flow
-
Raleigh Wyman
> 3 dayThis gun is a good value. I have used it about 1 hr. Getting it going was an issue. There were two problems. 1. There was a wasp larva in the sand suction tube 2. The sand suction tube was had a thin layer of metal sealing it off from the main air flow. This should have been removed during manufacturing. Once I figured out what was going on the gun worked fine. The nozzles are solid and for the little bit I used it, it works well Update: I have blasted with this gun for aprox. 10 hrs. It works flawlessly. Well worth the money
-
car99r
> 3 dayI have the Harbor Freight cabinet and my gun finally quit drawing media even after replacing the tips. I purchased this at it appeared to be the same. Fitting was a little different size so I just swapped out the one on my old gun with this one and it works great. Nothing fancy but does the job.