Legacy Dual Foot Chuck Extension, 1/4 in. - AL3025

Does what it is suppose to do. No signs of air leakage.

Liked fact that it worked. I had ordered other kit of chucks, quick connects, and interconnects from Amazon at same time and it was all junk. This Flexzilla Ball Chuck was ordered just in case other stuff failed (and it did). Picked up auxiliary things I needed from Home Depot.

I got this to make airing my motorcycle tires easier. The stick type of chuck is nearly impossible to fit in the small space between mag spokes and brake discs. This is much smaller and the angle makes it easy to get onto the air stem, both front and rear. You do have to push it on quickly or it lets air out - it engages the stem pin almost immediately when getting it into position. I put this on a threaded quick release attachment with some teflon tape and it doesnt leak. I expect it to work well for years.

The center does not stay put u have to wiggle it to get it to work its just junk

A complete P.O.S.!!!! You can hear and feel the air hiss out of it!

Works perfectly. Hopefully wont corrode and seize like the one I had before.

Good chuck.

The pin in the middle of the chuck that depresses the valve core is much smaller in diameter than any other chuck I have seen. It is so small in diameter that it is difficult to get that pin right onto the valve core. Frequently, the pin misses the valve core and goes between the valve core and the valve stem wall I have already bent a valve core as a result. I will not buy these, again.

My old brass air chuck broke down internally after 20+ years, and this new Legacy chuck works really well, and is a great replacement. I like the quick, positive connection with the valve stem and ability to connect / disconnect really quickly when only bumping up the pressure in very small tubes / tires, like with wheelbarrows, etc. Definitely recommend it, and I would purchase it again. Hope this helps you.

yep