LEIGESAUDIO 0/2/4 Gauge in 0/2/4 Gauge Out Copper Amp Power Distribution Block for Car Audio Splitter (2WAY)

Do not use if you have a 0 gauge coming in and splitting to a higher gauge for 2 amps. It made a pop sound and next thing I know my bass amp was smoking and it doesnt work.

Better quality than I expected. I have 1/0 wire running from the battery up front to this distribution block in my trunk. I use this product to run two separate amps, one zero guage after the split runs to my mono amp to push my subs and the other has 4 guage running to a 4 channel that powers my mids and highs. I used a multi meter to check for voltage drop after the block to make sure I wasnt losing any power and the reading was the same at both amps as it was at my battery. Great product. Would def buy again! The plastic cover actually clicks into place and is very study unlike others I have tried in the past. The only downside is the limited mounting holes (has 2, the pic is inaccurate) but I was able to drill an additional hole and its now solid as a rock. All in all EXTREMELY satisfied with my purchase. P.S. it has 3 reducer ferruls that I ended up not using. They seem to be well made but I opted to use a different type that I had from previous installs.

Worked out great easy mount , was able to feed my 4k amp and 500w amps in the trunk

It worked perfect for me

works great would recommend

This will hold a true 1/0 AWG wire no problem on both sides

Solid nice and heavy perfect for what I needed.

Great

Look good and nice quality. Only thing I didn’t like was there are only two holes for mounting it. The wire I ran to it wanted to pull the screws up so I had drill a couple extra holes to fasten it down

This product is exactly as advertised, the ports easily accept 0g and has an insert for 2/4g. It also provides adequate spacing between wires and has a quality weight and feel. The product met all of my expectations. Would purchase again