Lift Supports Depot Qty (2) Fits Ford F250, F350,F450, F550 Super Duty 11 To 16 Hood 7C3Z16C826AA 7C3Z-16C826-AA 8C3416C826AB BC3416C826AA BC34-16C826-AA BC3Z16C826A PM3730L-R SG204080
-
Jeremy Copeland
> 24 hourNot hard whatsoever. Easy step-by-step!
-
C&A Auto
> 24 hourGood job
-
Ethan
> 24 hourHalf the price and just as good!
-
Lauro M.
> 24 hourGood value and good quality
-
Walter Rice
> 24 hourInstalled these on my 2012 F350 Crew Cab KR, fit perfectly, only took a few minutes to do. Follow instructions (small flat screwdriver) easy. Seem to work great so far, only been a week.
-
Melanie E.
> 24 hourDon’t know the longevity since we just got them, but they are working
-
John Smith
> 24 hourEasy to install and worked great! Make sure you do both sides at the same time. I used a board to prop up the hood and used a flathead screwdriver to pop off the old clips they came right off. Then just pop on the bottom first I did not even have to pull the clip out it just popped right on. While lifting the hood to the full open position ( so you do not have to compress the cylinder ) push the top one on you might have to twist the top of the cylinder to get it to line up but it was easy to twist. Both sides went smoothly and I am very happy with them. Oh and yes there is a left and a right side they are not the same.
-
Dustin Ludwig
> 24 hourItems seems to be in good working order. Received two different hood struts. Easy to install. Value good but attention to detail from the shipper is not. Should have revived the same items, not different.
-
Philip
> 24 hourEasy to install. No Issues
-
Jeremiah
> 24 hourHood lift replacement for 11 f350. Fixed up slow cold lifting.
Why Purchase from Lift Supports Depot?
|
|
|
|
|---|---|---|
Premium Quality SupportsLift Supports Depot supports undergo a vigorous QC process to help ensure dependability. Lift supports internal components get assembled and mechanically tested to ensure internal parts are not installed incorrectly or missing. OE quality seals are incorporated to prevent low friction losses and oil seepage. Airline hydraulic oil helps to avoid crystallization and blockage during cold weather. After painting and curing, lift supports are tested again for pressure and printed with final product information and lot numbers for traceability. |
Vigorous Quality Control ProcessThe supports are pressure-filled and tested one by one for forces to be within accepted tolerances. Pressurized lift supports go through a pre-paint phosphate treating process, which helps the paint adhere properly to the body of the lift support and gives a long paint life. Most importantly, an automated paint cabin is used for painting and curing in one place. Our lift supports never have premature rusting at the extremities due to the capillary effect of paint in bent areas. |
Easy to InstallMost applications are quick and easy to install. Often times requiring nothing more then a flat headed tool to remove and replace. The hardest part is often finding someone to hold the Hatch or Hood while you swap them out. |
Insert a Flat Headed tool behind the U-Band.
Slightly Pull Back on the U-Band, allowing the claw to release the ball stud. Careful that you do not remove the U-band from the Support.
Place new support over the ball stud and press the ball socket over the ball stud.
Once this has been completed for all mounting points, carefully tug to ensure all ball sockets are secure on ball Stud.