LotFancy 12.5x2.75 (12-1/2x2.75) Tire & Inner Tube Set for Razor MX350 MX400 Dirt Rocket, X-Treme X-560 - Heavy Duty Scooter Tire Tube for Mini Pocket Bikes
-
Karebare016
> 3 dayDelivered quickly, fit perfectly!
-
Edna Hoppe
> 3 dayFor my son bike
-
Steve C.
Greater than one weekPerfect fit. Easy to install
-
Zyron M.
> 3 dayThe inner tube arrived with a hole at a seam. It was impossible to patch. I was able to buy a new inner tube separately at Walmart.
-
Nancy
> 3 dayThis tire and tube is very sturdy. Fit the Razor very well. We will get a lot of miles out of this. Just have to stay away from nails and sharp stickers:) Would recommend.
-
Danielle Holliday
> 3 dayGreat
-
Tina
> 3 dayPerfect fit, no air leaks.
-
E.Smith
> 3 dayShowed up ahead of schedule & fit was spot-on :-)
-
Lori
> 3 dayExactly the size needed.
-
jmbigg
> 3 dayWhats to not like? Its just a tube that came in the tire that was shipped simply wrapped in cellophane and ultimately thrown on our deck. It is a real pain to install on the rear wheel of a Razor MX350, but once it was finally on it was good to go...at least until next time. It was a decent price and shipped pretty quickly. The only suggestion I would have is to replace the tube with one with a threaded valve stem and a nut to thread on to hold the valve stem in place while installing. Overall, a good purchase to get this little bike back up and running.
12.5 x 2.75 Tire and Inner Tube Set
- Material: Isobutylene Isoprene Rubber
- Measurement: 12-1/2 x 2-3/4(12.5 x 2.75)
- Feature: Inflatable
- Pressure: 45 P.S.I
- Valve: TR13 Straight Valve Stem
It can be used on many mobility scooters, Chinese electric scooters, Currie scooters, gas scooters, pocket bikes, and other applications using the same tire size.
NOTE: Over or under inflating tube will result in poor handling of bicycle and damage to tire and inner tube.
Compatible Models for Reference
Razor MX350 Dirt Rocket
Razor MX400 Dirt Rocket
X-Treme X-560
GT-200 (2005 & Older)
IZIP I-750 (24 Volt)
EZIP E1000
Schwinn S750 (2005 & Older)
Avigo Extreme Motorcross Bike
Compatible Models for Reference
Currie Phat Flyer eZip E-500 eZip E-750 eZip E-900 eZip E-1000 Freedom 942 Freedom 943 Freedom 946 Freedom 947 Freedom 959 GT Asteroid GT GT-200 (2005 & Older) GT GT-500 GT GT-750 GT Shockwave GT Trailz GT Tsunami IZIP I-500 IZIP I-600 IZIP I-650 IZIP I-750 (24 Volt) IZIP I-750 (36 Volt) IZIP I-1000 IZIP I-1000 (Prior to 2005) Lashout 24 Volt 400 Watt Mongoose Fusion Mongoose M200 (2005 & Older) Mongoose M500 Mongoose M750 Mongoose Rocket FS Mongoose Z350 Razor MX350 Dirt Rocket Razor MX400 Dirt Rocket Schwinn New Frontier Schwinn S500 Schwinn S600 Schwinn S650 Schwinn S750 (2005 & Older) Schwinn S750 (2006 & Newer) - 24 Volt Direct Drive Schwinn S750 (2006 & Newer) - 36 Volt Chain Drive Schwinn S1000 & ST1000 Stealth Schwinn Zone 5
Why is your tube flat? Inspection is very Important.
|
|
|
|
|---|---|---|
1. Take the tire and tube off the wheelRemove the wheel by unfastening the handle holding the axle in place. Then, use a tire lever to get the tire off. Insert the lever between the tire and the rim and work it around. When the tire comes off, pull the tube out. Tips: It may be easier to remove the tube if you let all of the air out. |
2. Remove the object that punctured the tire if it’s still thereIf the object is still there, it could re-puncture the tube when you replace it, wasting all your work. Sometimes finding the object is easy, like if a nail is sticking out of the tire. Other times, glass or small rocks get trapped inside the tire, so shake the tire out to get rid of any loose objects. Tips: Gently run your fingers along the inside of the tire to free any embedded objects. If you have gloves, put them on to protect your fingers from cuts. |
3. Pump up the tube and look for the holeDo a visual check for the hole. If the hole is large, it should be easy to see. Check along the entire surface of the tube for obvious holes. Tips: Don’t stop looking when you find the first hole. If an object got inside the tire, it could leave multiple holes, so be sure to check the entire tube. |
|
|
|
|
|---|---|---|
4. Listen for air escaping if you can’t see the holeIf the hole is too small to see with a visual check, bring the tube up to your ear. Give it a light squeeze to force the air out, and listen for a “seeping” sound to hear where it escapes from. Then, use these signs to locate the hole. Tips: You still might not be able to pinpoint the hole, even if you hear the seeping sound. Use the water method to find its exact location. |
5. Dunk the tube into a filled sink to see where bubbles come up fromIf you still can’t find the hole, fill a sink with water and place the tube inside. Squeeze it so air escapes, and then check where bubbles rise up from. When you see the bubbles, you have an exact location for the hole. |
6. Rim InspectionInspect the rim strip whenever changing a tire or inner tube. Look for tears and rips, and make sure rim strip is centered over the nipple holes.In the image, the rim strip is damaged, which may cause a flat tire. NOTE: Hole on inside edge of tube indicates a problem inside the rim, such as from rim strip failure, a protruding spoke or other sharp object inside the rim. |
