MANMILAI 5 Pcs Towel Hooks Heavy Duty Black Wall Hooks Extra Thick Pure Metal with Screws Hole Installation Never Falling Hook Coat Key Robe Hanger (Sand Surface Big Black Hooks)

The hooks were fine with the exception of one with a defect. The screws were horrible. I drilled pilot holes and used an impact driver for the first three and on the 4th it snapped the head. After that I used a hand screw driver and three more snapped. I got some new screws from my supply ( silver) and will paint the heads black. Not at all happy,

Sturdy.

Love looks of these and the price isnt bad either

I bolted these so some half-thickness 80/20 to put hooks in locations, which can also be easily moved in 10 seconds.

I used these hooks for shed organizing. They are strong and well made, with smooth edges that don’t catch on things. I like that they are outdoors rated, because my shed isn’t climate controlled.

So I drilled pilot holes, then started the screws by hand before using a drill to screw them the rest of the way in. The first two screws I tried both sbapped off below the head. So I replaced them with black drywall screws which worked fine. A third screw broke as I removed the rest. Just toss the screws and the hooks are fine.

The description of the MANMILAI Black Bent Hooks B08JBSN47M includes a picture with dimensions, but the description of the MANMILAI Small Black Bent Hooks B08PB4S7NF does not include the dimensions. So I measured them and compare them to the measurements of the large hook. Sheet thickness same as large hook 0.118 Width at small end 0.31 (smaller than 0.43) Top to bottom 2.03 (smaller than 2.67) Width at large end 0.84 (smaller than 0.98) Center of holes 0.69 (larger than 0.63) Spread of hook 1.14 (smaller than 1.59) Bottom to small end of hook 0.72 (smaller than 1.06) The hook is non-magnetic, so it probably is stainless steel. The included screws are magnetic. The hooks are individually bagged and each hooks two black screws and two hollow wall anchors are individually bagged. Ill be mounting the hooks on plywood and will use my own screws, having read reviews describing the softness of the included screws. The small hook is just barely too small to comfortably hold my 5/8 diameter Level 2 EV charging cable. In the attached photos you can just barely see daylight between the cable and the small hook. Ill use the large hooks instead to support the cable over a six foot span between the EVSE and the cradle for the looped cable.

all good

I bought these for hanging bags and towels around the pool, they are a very nice stainless item and sturdy! Highly recommend!

I have them hung in my spare bedroom that is primarily used by my 3 grandsons. We hang their toy bow and arrow sets as well as their nerf guns. I added a small loop tag on the nerf guns to allow them to be hung.