











Master Paint System MPS Disposable Paint Spray Gun Cup Liners and Lid System, 50 Pack Mini Size 6 Ounce (180ml) Kit - 50 Cup Liners, 50 Lids with Strainer, 1 Hard Cup with Retainer Ring and 20 Plugs
-
ROY C.
> 3 dayThey seem to be the same quality, if not better than the name brand that costs about 50% more. I have used a couple of boxes so far and havent had one leak yet.
-
Bob Teaford
> 3 dayI love these cups! Some reviews mention leaks, I have had none but probably because I am very careful assembling the cups. The liners are cool, they drop into the hard cup. Pour the paint in, then put on the top(with the feed hole and integrated filter). This is tricky, it has a number of clicks as it settles into the liner. It has to be settled all the way in, kind of subtle, I suspect if this is not done then leaks will be had. Next is to screw on the black retaining ring. This too is fiddly, very easy to cross thread. I sight from the side and watch it go on. Also when screwing it on it can be screwed on too tight and skip threads, it needs to be just tight enough. There are no directions and very few if any online tutorials so I will continue. Once filled and capped keep the cup with the orifice pointing up and push the gun onto the cup. This has a few hitches/bumps as it goes on. Once it is completely seated twist one notch for complete seal. Then attach the gun to air and pull trigger with the gun upside down and all the air will be sucked out of the cup, leaving only paint in the now collapsed liner. Very cool! This is what lets you paint upside down without sputtering, paint keeps flowing. I tried to refill a cup and it didnt go well. If I need more paint I use a new cup. If I have lots left over I put the cup on top of my paint can and let the un-used paint dribble back into the can. Overall way better than the stock metal reuse-able paint cup, I will never go back!
-
Jason Martin
> 3 dayKit is great and easy, but the small lids dont fit on the small cups. They are the exact diameter.
-
Larry
> 3 dayLoved the product but it was missing the hard measuring cup and the black nut that screws on the top of the cup
-
Roger Mondor
> 3 dayThis is exactly the replacement needed for our paint gun.
-
David Evans
> 3 dayDisposable paint cups with lids.
-
Dave McJr
> 3 dayIve have used the 3m pps cups due to budget but these make it affordable for me. I ordered the correct adapter for my devilbiss set and have used these with primer gun so far with no problem.
-
Josh A.
> 3 dayThey don’t fit the adapters properly so they leak paint when you turn your gun upside down. I would love to return them but since I used one I can’t.
-
Justin Brammer
Greater than one weekA must have if you are doing any kind of continuous painting. So much time and money saved on cleaning out the stock canister over and over
-
Chet Walker
> 3 dayFacilidad de usó, bien construido