Monoprice Right Angle Power Cord - 2 Feet - Black, NEMA 5-15P to Right Angle IEC 60320 C13 14AWG Works with Most PCs, Monitors, Scanners, and Printers

Its as described, quality, heavy duty and good connectors on each end. But the build is so heavy duty that its really not something you want to use unless you leave it unfolded all the time. Really stiff to maneuver and handle. I even left in warm sun for few hours.

Needed a longer cord for a treadmill and this worked great. I wanted to make sure to use the same gauge of wire since it would be a longer cord. This one worked great and didn’t cost a lot.

Now waiting for a replacement thats actually 14AWG; the one I got was clearly stamped 18AWG.

Great for getting my laser printer closer to the back of a cabinet. Just check to make sure the cord comes out the correct direction (it does in my case). Great for laser printer since it is 14ga (15A rated) rather than the thinner gauge common for this style cord. Easily handles the power up surge as the laser printer warms up (literally, the fuzer heats up)

very sturdy, handles the extra current draw! shorter cords perfect for work bench setup. I have an 3 foot outlet strip under the shelf, the short cords keep it neat, and the right angle plug at the back of the equipment allows me to push it much closer to the wall.

Advertised as 14AWG wire which designated conductor diameter but overall cable diameter could also be mentioned to help in selection. This thing is .350 Diameter (almost 3/8) Overkill for my application.

Monoprice earned its place in the markets as a cable manufacture. Built to ISO standards the network cabling HDMI Redmeres along with the professional series cables are excellent quality items offering high durability and transmission performance. It is the first upgrade item. The commercial -grade dual-link DVI cables with integrated Ferrite Choke are huge and effective.

Works great at a long power cord on my 46 samsung TV. Its thicker gauge than what came with the TV.

Works like a power 14AWG cord, but the right angle PC connector shortens the depth of the female connector. Relocating my 7-chanel home theater amplifier to a new equipment rack resulted in a half inch excess depth placing significant mechanical pressure on the original power cord. The right angle design of this cord reduced the overall depth of the amplifier about an inch, a very simple and inexpensive solution to my problem. Be sure that the orientation of the right angle cord when connected to your equipment does not cause the redirected cord to interfere with other devices.

This is a good quality, heavy construction cord. Purchased to get power supply to set closer to the wall on work bench.