Mounting Dream Long Arm TV Wall Mount for Most 42-90 Inch TV, 40 Inch Long Extension TV Mount Swivel and Tilt, Full Motion TV Mount Fits Max VESA 800x400mm, 150 lbs. Loading, 16”,18”, 24” Studs

Bolts are extremely tight making it extremely difficult to conveniently move your TV defeating the purpose of this type of mount unless you loosen bolts which is not easy. Mount is otherwise functional

Super easy installation and works beautifully.

No anchors for brick or rock too much money for that not to be in the box

We have been looking for a bracelet to extend long enough and to be sturdy. Well it is both.

Bought this arm to mount my LG C2 77” OLED Installation was a breeze, super solid construction, couldn’t recommend this corner arm unit more. Look no further, this is the mount for any large heavy or light panel. Easy to level as well.

Good reach from wall so you can swing a tv out from the wall and turn it 90 degrees with ease. Worth the money

I have installed probably about 400+ TV this wall mount is not only SOLID but you can place a 75 Inch TV 90 degree TV to the wall. My clients need it to se the TV Sideways and this cut. I wasnt concerned for the quality of sturdiness and the weight. I can do pull ups with the arm fully extended (180 lbs) and still hold. Who ever designed this wall mount knew what they were doing. Note: To move it while is not holding the tv needs some force, once the tv is on, it moves easily. I installed this in Colynder Block. I can see why they say do not install it in sheetrock it will indeed brake the wall, you must find studs if install in sheetrock. Note: it comes with hardware to install. I wont use them, ( for the back of the tv ( the brackets) it is ok but not for the wall. I will suggest you buy your own. Overall, this is by far the best articulated wall mount I have installed.

This is an excellent full range mount, and is especially good for larger TVs that require a full 90 degree rotation. Because of how far this mount extends out from the wall, even larger TVs wont hit the wall when rotating 90 degrees. Its fairly easy to pull in and out. Someone smaller or not very strong might have issues doing it, but if you and a helper can lift your TV to install it on the mount, you should be able to use the mount. One thing to factor in when installing the mount is that it seems like its designed to be installed off-centered. Thats actually fine because the TV can can slide left/right as needed, but when you first install you might think you messed up. As long as you install it into the studs, you should be fine with this mount. Mine is holding an 80+ lb TV and soundbar. Also of note, I installed it outside on our covered pavilion. Its been there for over a month now with no sign of rust, corrosion , etc. About the only thing Im not happy with this mount is a month after I bought it, the priced was reduced by $40! I realize thats just bad timing on my part, but...darn it! Haha. It was worth the full price, so Im still happy. s

Sturdy was, awesome. Range of movement, especially given the size of the TV;ost impressive. The only complaint is that fifth mounting hole forced me to mount it 4 inches to the left of where I wanted it but luckily the rail on the TV left room for me to move the TV 4 inches to the right to make up for it so it all worked out. Very sturdy! Will by another for my much smaller TV in the bedroom. Overkill? Yes but love the big opening in the middle to hide cables in the wall making for a clean looking installation.

Item came just as described. Nice and heavy duty! Came with several different sizes of screws and spacers. The mount was easy to hang and with lots of cutouts so that I could line up the mount perfectly onto the studs. Also had a paper layout that match’s the base so you could lay out where you want it and predrill your holes for the lag screws. To work for my application I flipped over the head where the tv actually mounts so that the swing arm was on the right side and the mount would still tilt in a downward direction. This was accomplished by removing 1 bolt and flipping it and reinstalling the bolt. Very easy. The other thing I like about it and one of the main reasons i bought this model was because it has a very long reach which will allow me or other users to “get it around obstacles”. As you can see in my pics it had to pull out enough to get around the cabinets for ones on the right side of the room to see. This model easily does that with length to spare!! The mounting bars also have several spaces so that you can find the perfect fit for most TVs. This one had 4 different spots that would allow my tv to mount. The way i chose let some of the bracket hang below the tv which will allow me to mount a board and attach a sound bar to it as well (this may not work for all tvs) however if you didn’t want to see the mounting bars they would have allowed me to mount them flush i just chose not to. Over all this mount is great! Seems to be very sturdy and should last for a long time. Very versatile and has so many mounting holes, tons of tvs should fit. My tv is a LG OLED 65’ C series so if you have one, this mount will work perfect! Only thing I would say and it’s not negative, is that it’s heavy and you will probably want some help holding it up as you lag screw it to the wall. Once hung, your good to go!!