We just hung a 65 LG LED TV in our family room using this wall mount. Parts of it were a two person job and at the start it seemed a bit daunting, but the instructions were absolutely fantastic and very detailed making it difficult to make too many mistakes. It came with lots of different spacers, bolt sizes for the TV mounts, and so forth, so that you can experiment a little and come up with the best fit for your TV. We have blocking in our wall for a TV mount, so we didnt need to worry as much about finding studs, but you will want a good stud finder for mounting on a sheetrock wall. The mount is fairly easily adjustable, with left and right pivot, 3 degrees of rotation (achieved by slightly loosening the backing plate on the mount and shifting the TV slightly with a level on top - so it is not designed for frequent adjustment), and an angle tilt forward and side to side. You can also adjust the height by several inches by bolting the brackets higher or lower on the TV at initial install - we did this a couple of times to get it right. The end result is a solid, solid mount. It is well designed and we are super happy with it.

I will say that a 30 minute install time seems a bit ambitious. However, the process was not difficult. I was concerned because I had a stud dead center where I wanted the tv to go, but it was easy to center the tv even with the mount off center. VERY sturdy, easy to move and easy to install. I thought a wall mount of this quality would cost at least $200, this is an incredible value.

Took us about 45-1 to set up after looking at directions!

Was surprised by the really good quilts of this stand. The ones at Best Buy for 2x’s more didn’t even feel like this quality. I would recommend securing the back with extra thick 1/2 backer board for peace of mind. We have a heavy flat screen and wanted it to be really secure.

Bracket against the wall could oh been a little longer for 2×4 mount

It is needed to be installed on the wood studs if you have a drywall. I wish the drill bit is provided. Although 7/32” drill bit is instructed in the menu, I used a 1/4” bits. Even so, it is still very tight for the bolt. But over, the mount is very sturdy.

Great for my tv. Easy to install.

Easy to set up. Easy to adjust

My boyfriend is very good at carpentry and this was difficult to assemble. It seems as if they took the mount, cut it down to ship as a smaller unit, only for you to build it back up again. Seems sturdy for our 70 inch TV, but beware of assembly.

Very nice mount. And I miss read the description of the item and ordered the wrong size, but I will use this same type mount when I reorder!