Nabob Deals Arctic Silver 5 Thermal Cooling Compound Paste 3.5g Heatsink Paste High-Density Polysynthetic Silver with Bonus Tool (Arctic Silver with Bonus Tool)
-
Raff
> 3 dayI bought this for my ps4 that making a sound like an airplane. After I replaced the old thermal paste with this its running quiet and perfect now.
-
thanh ton
> 3 dayHave always been a fan of this paste
-
G. Olson
> 3 dayShowed up on time. Works. What else can you say about thermal grease?
-
Simon Edwards
> 3 dayProduct arrived as advertised and was applied with ease, I’d use this product again without another thought
-
Teylor youssef
> 3 dayIt worked good and got the job done.
-
Andrew Bohman
> 3 dayIt was a life saver when we messed up the original compound on the cooler.
-
Jacob McCullar
> 3 dayWorked as intended and dropped my temps.
-
Flavian Boanca
> 3 dayDefinitely one of the best thermal pastes on the market. You dont need to apply a lot, so it will last you a long time! The spreader makes it perfect to get just the right amount to cover the dye w/out having any spill over the sides. Usually a pea-sized drop down center is most common for most chips, however, with the help of this spreader you can make sure you cover the entire surface area with a thin film of paste.
-
nevi sanger
> 3 dayWorks good!
-
Manuel J Arvelo
> 3 dayExcellent heat transfer paste. Recommended.
Performance
3 to 12 degrees centigrade lower CPU full load core temperatures than standard thermal compounds or thermal pads when measured with a calibrated thermal diode imbedded in the CPU core.
Coverage Area: A 3.5 gram syringe contains enough compound to cover at least 15 to 25 small CPU cores, or 6 to 10 large CPU cores, or 2 to 5 heat plates. At a layer 0.003" thick, the 3.5 gram syringe will cover approximately 16 square inches
Arctic Silver Thermal Cooling Compound Paste 3.5g High-Density Polysynthetic Silver
Arctic Silver 5 does not contain any silicone. The suspension fluid is a proprietary mixture of advanced polysynthetic oils that work together to provide three distinctive functional phases. As it comes from the syringe, Arctic Silver 5"s consistency is engineered for easy application. During the CPU"s initial use, the compound thins out to enhance the filling of the microscopic valleys and ensure the best physical contact between the heatsink and the CPU core. Then the compound thickens slightly over the next 50 to 200 hours of use to its final consistency designed for long-term stability. (This should not be confused with conventional phase change pads that are pre-attached to many heatsinks. Those pads melt each time they get hot then re-solidify when they cool.
The viscosity changes that Arctic Silver 5 goes through are much more subtle and ultimately much more effective.)
|
|
|
|
|
|
|---|---|---|---|---|---|
| Arctic Silver 2 Pack + Tool | Arctic Silver + Arctic Clean & Cloth | Arctic Silver + Pad/Tool & Cloth | Arctic Silver + Tool & pad | Arctic Silver Starter Kit | |
| Package Contents | Arctic Silver x2 With Tool | Arctic Silver + Arctic Clean & Cloth | Arctic Silver + Pad/Tool & Cloth | Arctic Silver + Tool & pad | Arctic Silver + Cloth + Static Kit |
