Nabob Deals Arctic Silver 5 Thermal Cooling Compound Paste 3.5g Heatsink Paste High-Density Polysynthetic Silver with Bonus Tool (Arctic Silver with Bonus Tool)
-
gt_jjax
> 3 dayArctic Silver is the only brand I use
-
Emmanuel
> 3 dayExcelente producto
-
je
> 3 dayWould get again
-
Garrett Olsen
> 3 dayDont spread the stuff, just put a pea sized amount in the middle. Pressure will do the rest. Ive used this stuff for years on many many systems. Im not saying its the best but its always worked for me.
-
WILLIAM H JOYCE
> 3 dayAMD RYZEN to FAN conductivity
-
JDeo
> 3 dayFor the past two years, I used this thermal paste with my Noctua fan under heavy gaming loads and have never experienced any thermal throttling or high temperatures. Much of this can be attributed to the fan, but the paste is what makes the transfer efficient so it gets full marks for that.
-
MT
Greater than one weekSo far so good.
-
Corey Burns
> 3 dayOne of the best thermal pastes around. Consistent low temps.
-
Christopher
> 3 dayBrought down temps quite a bit on my 3700x. its a bit thicker than other thermal pastes ive used so definitely use the spreading tool and dont be afraid to ice the cake just a tad
-
Josh Campbell
Greater than one weekNot much to say about it- Its Arctic Silver, best thermal paste you can buy. Love that it comes with an applicator. Sure saves wear and tear on my credit card. Shipped fast.
Performance
3 to 12 degrees centigrade lower CPU full load core temperatures than standard thermal compounds or thermal pads when measured with a calibrated thermal diode imbedded in the CPU core.
Coverage Area: A 3.5 gram syringe contains enough compound to cover at least 15 to 25 small CPU cores, or 6 to 10 large CPU cores, or 2 to 5 heat plates. At a layer 0.003" thick, the 3.5 gram syringe will cover approximately 16 square inches
Arctic Silver Thermal Cooling Compound Paste 3.5g High-Density Polysynthetic Silver
Arctic Silver 5 does not contain any silicone. The suspension fluid is a proprietary mixture of advanced polysynthetic oils that work together to provide three distinctive functional phases. As it comes from the syringe, Arctic Silver 5"s consistency is engineered for easy application. During the CPU"s initial use, the compound thins out to enhance the filling of the microscopic valleys and ensure the best physical contact between the heatsink and the CPU core. Then the compound thickens slightly over the next 50 to 200 hours of use to its final consistency designed for long-term stability. (This should not be confused with conventional phase change pads that are pre-attached to many heatsinks. Those pads melt each time they get hot then re-solidify when they cool.
The viscosity changes that Arctic Silver 5 goes through are much more subtle and ultimately much more effective.)
|
|
|
|
|
|
|---|---|---|---|---|---|
| Arctic Silver 2 Pack + Tool | Arctic Silver + Arctic Clean & Cloth | Arctic Silver + Pad/Tool & Cloth | Arctic Silver + Tool & pad | Arctic Silver Starter Kit | |
| Package Contents | Arctic Silver x2 With Tool | Arctic Silver + Arctic Clean & Cloth | Arctic Silver + Pad/Tool & Cloth | Arctic Silver + Tool & pad | Arctic Silver + Cloth + Static Kit |